The Hub

Hello, I replaced a nut with a tusq nut. Nut slot height is correct, neck relief is good, action is good. But I’m still getting buzzing on low E and A strings on frets 1-3 primarily. I checked the fret height on fret 1 and it is sitting lower in that area specifically .038 inches. Vs .040 inches for the rest of the frets. I’m thinking this is what’s causing the buzz. Is my thinking correct? Is there something I can do other than a fret lev…

Hi Everyone,I hope you’re having a great weekend! Can anyone help diagnose my mystery B string buzz? I tried to attach a video but the site won't take it. I’ve tightened all hardware and the b string is not hitting any frets. I’m giving it a set-up and when I had to lower the nut slot height of the B string it improved a bit. When I capo at the first fret the buzz disappears so it seems to be something going on at the nut. …

Question for the group.. Let's say you start with a new nut blank and leave it too tall, but cut the slots to the proper depth. So you are left with a scenario where the strings are fairly buried in the nut (not protruding from the top), would that affect playability or just potentially cause binding issues and look bad? Thanks, James

Hello looths worldwide ! I once heard on the Loothalong Grace talking (figuratively) about for a list of all the things thay may cause rattle in a guitar, and after fighting with a setup lately I'm in for starting this list, from the headstock down : - Old strings : replace the strings. - Loose tuners : tighten the ferrules, tighten the screws (on the buttons / on the axis). - Nut : create a funnel for the strings to ease the path to the t…