The Hub

Hello All I have been using Ted Bergstrand's online nut calculator on Benchmuse.com which is excellent. It allows you to have a consistent gap between each strings vs the progressive gap that the Stewmac rule gives you. Or you can do consistent centers to the strings. I have definitely found measuring the nut with calipers to work a lot better than the stewmac rule and don't use the rule anymore. I wanted some additional functionality…

Sadowsky use unique control plate screws which are much smaller than common plate screws. I believe the ones they use are: #3 × 3/8" Phillips Pan(domed) Head Black Oxide csk self tapping Sheet Metal Screw Type AB thread. Being in the UK, these are really hard to find, pretty much don’t exist here, so can anyone please help me or point me in the direction of a supplier? I’ve contacted Sadowsky direct with no response and also many of my main…

HEy FOlks. Ive Been using a really old timer and reostat control, with a separate thermometer, on my heat blanket set up for a while. Its worked, but id like to be a bit more mindless about it if possible. Does anyone have suggestions for heat blanket controllers that have a digital readout and built in temp control sensor?

It's that time of the year when I start to get all paranoid on the humidity levels of my shop. It happens at this time as the heating seems to send my hygrometers out of whack and it's quite difficult to keep things stable. So far i've been relying on keeping a 45% constant humidity in an automated system I built on Domoticz (similar to Home Assistant), which control a humidifier and dehumidifier. I'm not that confident i got this nailed…

So, like an idiot, I got well into the installation of an Anthem pickup system when I realized that the soundhole braces on this guitar are effing Lincoln Logs. They're easily a quarter inch thick (and feel like basswood). Because the Anthem preamp is designed to straddle the soundhole brace, I can't fit it as-is. Anybody got any experience with this? OPTIONS THE CLIENT WOULD NEVER GO FOR (and wouldn't thrill me either): 1. Replace the bra…

Would you have any recommendations on wiring configurations and piezo controllers to replace the electronics in my Music Man Reflex, which used to have the Game Changer system? The guitar has an HSH pickup configuration with a piezo bridge pickup. It has three existing holes for Volume/Tone/Blend, a blade switch slot, and a 3-way switch hole. When I bought this guitar about a decade ago, the Game Changer system offered a mind-numbingly a…

Friends, I am looking for a wiring schematic that shows how to set up 2 humbuckers, each with their own Volume pot -- no Tone in this circuit. Everything I have has some type of Tone control in the circuit. Any suggestions? Thanks!

Got a 60’s Hofner bass coming in that is noisy and feeds back (according to the owner). Thoughts on why? Any chance taking out the control plate screws could be an issue?

Hey! I had a customer drop off an ultra clean 60’s L4 and he has a repro de Armond rhythm chief he wants installed. Does anyone have any experience installing these with minimal modifications? It has the pole that mounts on the fingerboard which I’m hoping is the only mod. I ordered a repro guard and it will need to be notched for the pickup and have the volume and tone control mounted. Does anyone have any experience mounting a jack to th…

Ok. I am stumped. PRS Studio is in. 3 pickups. 5-way selector switch. 2 pots. Here's the dilemma: Customer wants two concentric pots installed. The front pot would be volume for the neck & middle pickups on the top knob, the bridge volume bottom knob. The rear knob is for tone. Top knob controls neck & middle pickups tone, bottom controls the bridge tone. I've gotten the skeleton of this sort of figured out but I don't....ha ha? The PRS 5-way…

i have a 2010 g&l asat bluesboy with a loose barrel jack. which is to say, when a cable is gently unplugged the jack comes out of the body. there is no nut on the inside of the control cavity to hold the jack in place - it looks like the wood itself is threaded. the jack barely protrudes into the control cavity so i don’t see an obviously good way to get a washer and nut on it. any ideas outside of enlarging the hole and installing a jac…

Hey everyone. I’m trying to figure out a wiring scheme for a modded National Triolian resonator guitar. It has a Fishman Resophonic end pin jack pickup (link to that is below) as well as a lipstick pickup that was installed along with a three way switch, and two potentiometers. Essentially what I’d like to do is wire it so there is one volume control for the lipstick pickup, one volume for the piezo, and the three way switch controls eac…

This thing had a conveniently placed hole in the neck pickup cavity that ran all the way to the end of the tenon, presumably the entry point for the long drill bit that drilled the access from pickup cavity to control cavity before the neck was originally fitted. I injected several pipettes of hot water into this hole while heating the fretboard extension area with a silicone blanket to loosen the extension from the body. Reactivated hi…

I'll start by saying I don't post much because it's confusing to know if I should post on this site or the Patreon site, both are hard to navigate, etc. Also, I sent this question to the last "elder" meeting but I have no idea what the outcome was (I thought there would be some answers documented for those that can't attend live). So, with those frustrations out of the way... I have in my backlog a 1988 PRS Studio. It has HSS pickup c…