The Hub

Hi guys, it's my first post here. First of all, english is not my first language, so I'm sorry for any mistake or its a bit rough. Recently I have a Sterling Maj200xsm from a costumer that has tunning issues with the tremolo. Any of you has experience with this model? I made a full set up and I checked the nut, saddles, springs, and dont found the trouble. Sometimes there are no issues at all, then the 2º and 3º string goes higher, then…

Hi all, I'd like to get some input on how to address this top blowout. For starters I own this, I got it as a project guitar, 71 D28. I'm not as experienced with acoustics as electrics and this is a big project but I got it to learn new skills and I'm confident I can do it with guidance. It had been stored in the case for many years under tension and was way too humidified. The bridge had pulled up I assume in stages. The center seam se…

It’s Factory Friday! I’ll be in the shop today from 2–4 PM Eastern for the weekly open office hours. Drop in, hang out, ask questions, talk tools, guitar building, SMF, or whatever you’re working on in your shop. No agenda. No presentation. Just shop time. Join at www.stringsmicrofactory.com/factoryfriday See you this afternoon! ✌️

I've built a number of classical guitars with an adjustable neck and they seem to gather quite a bit of interest, so i'm currently in the process of looking to refine the design and build. It's quite a simple construction where the neck is held together by string tension and hangs on a pivot. I developed a 3d printed "socket" which acts as the interface between the body and the guitar and allows for some fine tuning of the alignment of t…

Hello, One of my commissions is coming down the pike and it's going to be my first time using bar frets. I could use a once over for any helpful tips if you have any. About the guitar: Aged HD-28 but mahogany back and sides. I think Martin called this a HD-28 M? Skipping the truss-rod and using two carbon fiber strips. My process for Frets: 1: I CNC my fingerboards to a 16" radius and for T-frets I use a .023" to cut slots with a mat…