The Hub

Back at tinkering with the new Isoparametric Curve tool in Fusion. Scroll down to PICTURES LETS GO! If you want to skip this little walk through Autodesk Fusion memory lane, clearing up some of the UI conFusion. Why something so seemingly basic, is just being added today. 2009- Autodesk Inventor, hybrid modelling experiment, parametric and direct CAD in one hybrid system. 2011- Autodesk acquires T Splines Inc. an organic modeller still in…

I usually build flat top guitars and usually joint the tops and backs with a Stanley no 5 style of hand plane ( only different brand). I want to build an archtop instrument, and the wood blanks I have are longer than usual and, of course, a lot thicker. What size plane do you use for kind of job? Would it be easier with a longer plane (6 or 7)? Thanks! Jorge

Hello -- I am trying to joint a Tele-style mahogany neck blank. I have a Metabo planer in good condition, but no jointer. I secured the c. 40 mm thick blank to a flat plywood sled and shimmed it well. It's hot-glued in place, and absolutely no rocking from any corner or edge. But as I plane it down, I still have about 1 mm difference from one end of the blank to the other when I put a straightedge on the surface (see photo, with backlig…

I need to make a router template for a rear access control cavity in the PRS style of 1 vol +1 tone +1 switch? Placement of pot and switch holes aren't important, just the contours of the cavity so I can print a routing template. Does anyone have a file? Thanks! Justin