The Hub

Hi guys, it's my first post here. First of all, english is not my first language, so I'm sorry for any mistake or its a bit rough. Recently I have a Sterling Maj200xsm from a costumer that has tunning issues with the tremolo. Any of you has experience with this model? I made a full set up and I checked the nut, saddles, springs, and dont found the trouble. Sometimes there are no issues at all, then the 2º and 3º string goes higher, then…

I am a retired dentist. One saying we had was, “You can’t fix what you can’t see.” And another was, “The day you start working with magnification will be the best and worst day of your practice.” The worst because you will see what you have been missing, and the best because you will never miss it again. So even though I have my Dan E. Model visor loupes, and my retired dental loupes on throughout the day, sometimes, it’s not enough. I pi…

A visual dependency map for Autodesk Fusion. It turns complex Fusion designs into an interactive map of model logic, helping users understand how parameters, sketches, construction references, features, bodies, and other design elements relate to each other. Instead of digging through dense timelines, browser trees, and feature chains, Node Atlas gives users a readable graph of how a design is connected. It is built for designers, builder…

I’ve been speed modelling parts with the printer running 24/7 since inception. There are currently somewhere around 75-100 individual pieces modelled in my source file. Mostly only building on what I’m considering the X axis, but it’s Freeform so I’ve used them to build out Y.. anyways… Connectors, Extenders, Couplers, Links, Sleeves, Feets, Plugs, Panels, Hooks… and on and on. In a moments time, I will have a mass drop folder of Standar…

Great Tool. Great Benchy. Testing Threads, Sliding Dovetails, Overhangs, and it’s actually useful instead of that boat.. so testing wear resistance too. igus iglidur I151 Thanks for the model @member

https://www.instagram.com/reel/DWAuW40jAR_/?igsh=MW1jNDdoYzllMGFmMA== I’ve spent a few overly caffeinated days bouncing between modelling environments, different combinations of operations, tools.. subtle differences in how the coffee is brewed. In short… • Building Iso Curves in Sketch. Defining the surface structure and flow • NURBS Surfacing from curves, smooth intentional surface topology. • BRep Face to T-Spline in Form Environment. Org…

Back at tinkering with the new Isoparametric Curve tool in Fusion. Scroll down to PICTURES LETS GO! If you want to skip this little walk through Autodesk Fusion memory lane, clearing up some of the UI conFusion. Why something so seemingly basic, is just being added today. 2009- Autodesk Inventor, hybrid modelling experiment, parametric and direct CAD in one hybrid system. 2011- Autodesk acquires T Splines Inc. an organic modeller still in…

Dear looth community/colleagues around the world, During 2023/24 I have developed a digital gauge to measure so-called longitudinal twist of (bass) guitar necks: the LTwist® gauge. Just to be clear, this is about the "cork screw" type of deviation along the length of a neck, not the bow of a neck. I think there is no need to explain how a too severe neck twist can make it difficult or even impossible to set up a stringed instrument (guita…

Here is a super basic thing I just modeled and 3d printed. Small drill guides to place a 2mm hole directly centered in the side of a fretboard. I made a few sizes for different fretboard thicknesses. Seems simple but its a huge time saver.

I've seen the Elevate Luthierie jig, and it seems simple enough. One thing I don't like about their explanation video is the handwaving around "set the joint length where you want it"...feels like even with the jig, you have to do too much measuring to make it fit exactly (or within the tolerance you want) Given I can model well enough in Fusion and have a 3D printer, feels like a challenge to take on! As far as I can see, the jig is just…

This is a repost from the main feed so it is in the correct forum. The recent F5 CAD modeling video inspired me to take a stab at it. I use Fusion 360 and have already completed a full A5 model that I’m using to prepare a lot of parts for my CNC. The F5 top seems intimidating. I focused on modeling the scroll alone for now. I didn’t pay attention to following a plan, or having perfect dimensions, or getting the curves to look perfect th…