The Hub

Client wants me to add a Tone control similar to this (pic) to his archtop. where can I get one? Thx!

I’ve got a client requesting a weight reduction on his Kurt Cobain Jaguar My approach would be in 3 steps see how much I can route down the existing cavities (might not be a lot of weight loss) route under the pickguard without compromising the instruments integrity if additional weight loss is required, drill into the body with airline drill bits to gain a few more grams current total weight all including 4.2kg Any advice is welcomed 🙏🙏🙏

I was approached by a local music venue about finishing over the signatures on this Dean guitar. I have finished over signatures before, but never an entire guitar. The main challenges, as I see it, with this endeavor is prepping the existing finish. Cleaning the existing finish without disturbing the signatures will be time consuming enough, but abraiding/sanding the finish will be cost prohibitive. I have already experimented on a test…

Guitar fell straight down on the headstock when it was hanging up at the refinishers. Shit really does happen! Grain is pretty much shattered around the adjustment nut. Thinking I’ll replace the entire broken area with a completely new piece of mahogany. Scarf it in between the volute and 3rd fret. Probably even a 3 piece lamination to mimic the neck. This one was not the clients fault so the expectations for looking close to original a…

Any tips on handling the off-gassing for vintage guitars? I just took in a 1941 D'Angelico. The original tortoise shell pickguard is gone and has been replaced. New case as well. The frets up the neck are going to need to be cleaned. But are there any other precautions I should tell the client to take? Anything I should take into account? -Mike

Gibson Roy Smeck Radio Grande 7 string! in for tuner replacements... Currently has faulty original grovers, wants waverly titanium that I'd have to modify the plate shape to fit---and drill a new lower hole mount to avoid new holes drilled in the headstock ( around the "e" in waverly logo; and new plate hole and old plate hole would intersect by a whisper ). I'd have to remove the cog to mill & install, but the mounting screw head has c…

I've got a client with a '72 Tele. It needs a re-fret, but the truss rod isn't functioning. In fact it's backed out of the channel significantly, and there's a bulge in the neck underneath the first fret which suggests to me there's something going on with the truss rod anchor. The puzzling thing is the wood in the neck has bulged, but the skunk stripe and the finish don't appear to be disturbed at all. I'm thinking I'll probably hav…

Hello! A client of mine have given up on the idea that he'll make good use of this Gibson and Fender stash. He willing to entertain separating items and is open to offers. No idea how to value this lot... Please call or text 1-765-729-5282 if you have questions or offers. Located in between Indianapolis and Fort Wayne Indiana. As I understand it, getting NOS Gibson headstock veneers can cost and arm and a leg these days... The headstock ve…