The Hub

in for some top cracks and playability issues, neck is underset by almost 1/8" with significant hump at the joint...just got the strings off and got a better peek under the circus tent and... how the what the why? i just... really I... ummmm....can anyone guess what is going on here? Tempted to hand it back over any half-measure foolery. Third Japanese built one in this year but I've not seen this sort of hijinx...

Hey folks! I picked up a neck relief gauge from Doug in one of the earlier batches, maybe the introductory run? Some of the small feet caps that thread onto the moving legs of the tool have cracked, broken, or become worn down. I contacted StewMac about purchasing replacement parts, but they don't sell subparts for the relief gauge and otherwise won't help me. They appear 3D printed, so I was wondering if anyone with the means to print s…

I working through a long top crack repair on a c.1964 Fender Newporter and need to do a little touch-up on the clear coat. The top coat is matte over a do-do brown stained mahogany top, I'm guessing around a 10-20% reflectivity. Questions: 1. What top coat product did Fender use on these? 2. What should I use that has great self-leveling qualities and will melt into the old finish? <>

It was attacked by a Martin Dreadaught on a small mountain stage resulting in a faceplant. The top is Redwood. I was able to get it to glue up fairly well and have done some splice and drop fill on the vertical cracks. I'm curious about suggestions for the deep cross grain areas. I am hoping to not re-shoot any lacquer and just rub out the finish with some Kovax dry sanding. It was never high gloss buff to begin with and it's a personal…

Hello looths! Long time lurker, first time poster here all the way from New Zealand. I have recently acquired this 2008 Martin D-35 for a very cheap price ($1000 NZD - around 600 US!) it's dried out in a very cold environment and has two substantial cracks running all the way across the top, one large side crack, and a previous side crack repair that's been done quite poorly. I'm only about 3 years in to this repair journey and this is d…

Friend brought his "old guitar in the basement" over for me to have a look at. Long story short, it's a 1945 D-18, it's all original and it's a beauty. He had no idea. I explained to him that it was worth somewhere between 15 and 25 thousand bucks, that it needed some fairly routine repairs and that he should get - among other things - an insurance rider and take a little more care of the guitar than he has been. Picture attached for fu…

Hi all, I got a Do Santos DSMSCC RC in shop, the Spanish heel has failed , or rather collapsed into the soundboard, splitting it on both sides along the grain, a broken brace just under the fingerboard extension , cracks on both sides on the top/side bindings, I measured wood humidity on the fingerboard 9% and inside the (very inaccessible) body 11% The normal procedure would be to re-humidify before jacking or clamping back into place ,…

Question about splines: At what point are they necessary? My question is primarily regarding the crack to the left between the bridge and the sound hole as well as the crack at the upper bout that runs along the fingerboard extension. I have already glued them both and used the TJ cleats that run the full length of the cracks. I have already splined the lower bout crack that runs from the bridge to the binding as it was super gappy and d…

A customer brought in a Gibson ivory top A3 mandolin. It's in good shape and has all the parts. He found it at the local thrift store here in Bishop. He wants it mechanically sound. Here are the problems: 1) Everything that comes into the shop has a shrinkage component and the effects of course very from instrument to instrument. This instrument is no exception and the results of that shrinkage, in this case, are severe. The top, ba…