The Hub

Hello everyone, I hope you're doing good. I'm very much a new guitar repair enthusiast, any advice or feedback would really appreciated. I'm working on this Yamaha FG410A, as you can see, it's in rough shape. The guitar lived in a case in a storage container since the 90s. The guitar was really dry when I got it, so I started my slowly introducing moisture. I removed the frets and then put the guitar in a bag, with a hygrometer…

Hi all, I'm new here. I've been playing guitars for ~15 years and recently started as a technician at a music production school in London, where part of my job is maintaining the guitars. I picked up this 50s parlor nylon the other day and it's in bad shape but I don't know how to go about repairing it. The main issue is the bridge. The guitar was kept high strung and the bridge has twisted and lifted off slightly at the base. T…

Hello all, got a problem in a telecaster I rewired that has me in a twist. The basics: friend has a 2001 US Standard telecaster (left handed not that it matters). He bought it used and says it was quiet initially. A few years back he grabbed the pickups out of it and moved them to a new tele body with a torrefied maple neck he preferred. Recently he upgraded the new build with a Lollar CC tele set, and asked me to reinstall the original…

I did a pretty big update to my web tools last week. These are updated from the older versions I had up on celestialinstruments.com. There’s an updated FFT tool now, plus mode detection for guitars and plates, wolf note detection, played-note energy transfer, monopole mobility, plate thickness calculation, and 1/2/3/4 DOF modeling that can be prefilled from FFT data. The part I’m most excited about is being able to fit a measured guitar re…

Hi folks, I thought you might be interested in this approach to having easy height adjustment for a GoBar deck. I learned this tip from my buddy, Don Parker. He lurks around here too from time to time. :) The basic idea is rather than having a booster platform on the base for use when gluing braces to plates you bring the roof down lower. There is a 3D printed spacer in black in the pics. I linked to a downloadable STL and 3MF of…