The Hub

Sadowsky use unique control plate screws which are much smaller than common plate screws. I believe the ones they use are: #3 × 3/8" Phillips Pan(domed) Head Black Oxide csk self tapping Sheet Metal Screw Type AB thread. Being in the UK, these are really hard to find, pretty much don’t exist here, so can anyone please help me or point me in the direction of a supplier? I’ve contacted Sadowsky direct with no response and also many of my main…

Hello again folks, how is everyone! So I'm curious about what people here think about re-tops, who's done them, and what sorta ballpark rates you've charged for past completed jobs. I've got a bit of a wild one here, so strap in if you've got a couple minutes for story time! Back in 2012, I traded an HD28V of mine for a cool 1966 D-35 that needed some work. Basically, the body and neck of the guitar were fine apart from…

Hey lads I'm in a bit of an indecisive spot with a 70's yamaha acoustic refret. Pulled the original frets and the tang is .018" with no barbs just divots pressed into the lower edge. The slot is measuring .018". Struggled to find any suitable sized fretwire in stock in the UK that match what the customer wants that'll fit in the slot. Sintoms looked ideal but couldn't find any, so went with something with 0.20 tang and they're not pressi…

Hey all, My father-In-law would really like to make a rickenbacker 4003. I’m based in the UK and I can’t find a suitable template/templates for this. I wasn’t sure to post this in the CNC forum but thought I’d post it here first. I have tried crimson but no luck, but they’ve mentioned many people have asked about them. Thanks for any help it’s much appreciated