The Hub

Hello All! My first post and I'm very happy to be here and share the highs and lows of this pony ride. After years of bending sides on a hot pipe or bending machines belonging to 'other people', I finally built myself a bending machine. Functionally it is great, but the result on some test material was far from great. See pictures attached. What you see here is a doug fir 'test side' that certainly came out guitar shaped, but oh my, what…

Okay gang I have a doozy of a crack repair. Young guy brought in a Epiphone LP Limited Ed. He had picked up the case while it was unlatched at the guitar took a nasty tumble. Severe finish damage, and the wood has a shear split in it as well. The undercoat is thick with a thin layer of nitro color on top. Spoke with a sweetwater rep and they said that the finish was nitro. Here's the guitar specs via Zsounds: Epiphone Inspired by Gibson…

Hello, (First post) I'm a newer builder and I'm rebuilding an old destroyed archtop as a learning experience. I am using WEST System epoxy to glue in the new braces. I successfully got the first one in and the problem is with the second. It appears that the epoxy for the second brace did not set or cure. The leftover glue in the little cup is still flexible and sticky after a few days. I suspect the issue is I didn't have enough hardener…

Im going to attach some photos of a 000-style guitar from Potomac(I believe an Eastman product) that has some top cracks and deformation around the neck block from what I assume to be a shift of the neck block. How do you all approach repairs like this. Im thinking that pulling the neck and somehow pushing the block back into place from the inside is about the right course of action, but if anyone has some advice, Id appreciate it! In th…

Refretted my Yamaha Studio Lord 550 with jumbo frets. This is my second fret job. First was on a bolt-on BC Rich neck. The Studio Lord (Les Paul copy) was my first set neck project. It is pretty good. No fretting out. I set the action at 4.5/64 on bass and 3.5/64 on the high strings. Today I noticed that if I bend a high F to G (13th fret on first string), the note frets out (I can get to F # no problem by bending from the 13th).

This is equally suitable for "New Build" and "Repair and Restoration" sections of Share Your Content...! I have recently done a few posts on Instagram about my plan to build a number of "cheap and cheerful" ukuleles which will (I hope) promote both my brand and the little country of Luxembourg, where I live. They will be on sale in a craft fair later this year, so will be priced to attract casual passers-by. I made some fun marbled paper…

Thinking of trying a scoop cutaway on my current acoustic build. I actually planned to do it but I’m having second thoughts. I have no issues bending a cutaway. Question for those who have done it - is the higher end of the fretboard still comfortably accessible with the scoop and, is there any perceptive difference in sound by saving that small portion of the upper sound box? I guess I’m just wondering if the extra work is worth anyth…

Hello everyone! I'm having quite a lot of issues with a Jackson Warrior I'm refinishing in 2K Spraymax. After a week, it is still not completely cured and it dents whenever I do the "fingernail-test". This is already the second time this happened. My process is: Sanded the body completely to bare wood, up to 320 grit. Filled with Z-Poxy, let cure for 24h. Sanded back to 400 grit Sprayed 1K primer, let dry for ~2 hours Sprayed 2x 1k color coats…

Should a CNC be able to cut a perfect looking circle? I'm trying to make solid wood rosette rings. I made the tool path a profile cut. The top and bottom of both Y positions come out uneven in width than the rest of the ring. I've tried slowing down the feed and plunge rate, but it doesn't seem to make any difference. I have an old second generation Nextwave CNC shark and use Aspire for CAD and CAM. Linear cuts seem to be accurat…

Hi everyone - although I am not the most experienced builder, I have made a number of bass guitars. However, I have now dealt with 2 instances of serious blow-out while routing the body edge. I use a pattern bit and mark the grain direction all around the perimeter of the Alder body blank -- the attached photo shows today's lovely result. I will be gluing on a figured Maple top and now need to trim away the bad section, changing the con…

Hello, Help needed please! 🙏 It’s a Washburn g10v that I am trying to source parts for. The owner wants to do a full restore but we can’t move forward with the job as the trem is missing the micro tuner thumb nuts. The trem is a big old rare thing with 2001 on the edge of it. Please see picture for reference. (Taken from reditt, a common problem it looks like) I have one of the thumb nuts here and I think it’s a #no.5 -44 UNF thread. But it’s…

So this 46' J-45 came to me at a very very low price as it needs extensive repair. Much that I am confident in, cracks, bridge/bridge plate issues, loose braces and the like. There are however a few points that id like the groups opinions on. The neck angle is pretty great and theres a good amount of fret, however, at some point in its past, someone shaved down the neck to a dangerous point, and the back of the neck has toms cracks along…

Hi Everyone, I’m working through building my first set neck electric, an LP Jr. I had some build questions… - if you’ve built these Gibson style set necks before, did you cut the neck pocket straight and angle the heel of the neck? Or did you cut the pocket at the angle and keep the bottom of the heel straight? I’m attempting to cut the pocket at an angle, and it isn’t the easiest thing to do, I’m finding out. First, I’ve had some moveme…