The Hub

I have a Hoffner bass with a neck that broke loose. The main problem seems to be that that neck was loosely fit and was relying on a thick layer of glue at the bottom of the neck pocket to hold it in place, it looks like some shimming is in order. My question is about getting the neck angle correct. With the bridge thumbscrews at the bottom of their adjustment, should a straight edge on the finger board touch the top of bridge, or the to…

I have a new client with 100+ shredder type guitars. He gave me a couple of the easier ones to work on. The first is an ESP which fretted out with bends up above the 12th fret. I thought it was just the 2/64th" low action, but the last two frets seemed really high. I suspected there was a shim in the pocket, and yeah, there was. The bottom of the neck heel is deformed where the shim was. The shaded/dirty area at the bottom edge. Not den…

This is a Suzuki violin company 'Three S' OM-style guitar, circa 1970s. This particular instrument was sold in the Japanese domestic market (my customer purchased it in Japan) but I've seen others in circulation here in Australia so presumably some were exported too. Sides and back are laminated rosewood, the top is solid spruce. Although this ended up being a relatively standard reset, I feel like this is worth documenting as prior to…