The Hub

So, I've seen people having to deal with crappy binding glue on newer Martin's. I have a D35 at 50 (2015) and the purfling has separated from the guitar body all the way around both the top and bottom of the guitar due to heat. Not only that but the binding has separated from the purfling in spots. The glue is still tacky and it's almost like a thick stain as it has impregnated the top and sides, making it impossible to completely rem…

In the process of evaluating the repairs needed on this guitar I checked to see if the truss rod was working. There is hole in the transverse brace where you would normally insert a truss rod, but all I see is the end of a metal bar with a smallish hole in the center. I tried several allen wrenches that would fit in the hole, but nothing seems to grab. Did they really eliminate the adjustable truss rod on this vintage reproduction? Here'…

I've been slowly chipping away at a rebind on a Gretsch streamliner with full on rotted binding. The repair was started by a luthier in KC that passed away a couple years ago and I inherited the repair after it sat for a few years. I've glued some binding back in place on martins with the Pacer canopy glue, and that has worked out fine in the past. I did a test w/ some new ABS from stewmac that I was going to use for rebinding the gr…

This is my mid 50's LG-1. I had the back off to replace the bridge plate and one of the braces. I've got it all back together now but I'm lacking the knowledge to make my work disappear. I was using amber CA glue to color the binding but that didn't seem like the proper route so now I'm scraping, filing and sanding that back off and starting over. I watched Doug Proper's demonstration on liquid binding repair and that did have a lot…

Hey guys, I’ve got a crumbling binding issue on a 1977 Gibson F5 mandolin. After viewing the liquid binding repair video from Doug, I ordered the appropriate(I think?) chemicals to mix with my Gluboost Master Glu and attempt the repair. I mixed the titanium white with the Dioxane, and the Butoxyethanol, and then when I mixed in the Master Glu. As soon as I mixed in the glue, it got hot and smoked and turned into a solid mass pictured in…

Would love some advise on how to stabilize/repair this tortoiseoid binding on a 70's J-45... I'm thinking of wicking gluboost ultra thin into the cracks and then building up the missing areas with the thicker viscosity gluboost. Am I on the right track? Thanks in advance for any wisdom you all might be willing to share...