The Hub

I am repairing a damaged Stella parlor guitar. The original top was birch, plain sawn at 0.100 inches thick, ladder braced with multiple beefy braces and irreparably split, warped and generally separated from the sides. I want to keep the instrument ladder braced with a movable bridge and upgraded tailpiece, all firsts for me. I would be grateful for input on 2 issues. 1. The new top is Adirondack spruce that I’ve reduced to about 0.110…

Since most of us fix or make guitars, we have probably heard something about the cease and desist letters Fender has sent out concerning the Stratocaster. I thought I would offer some thoughts. As always, caveat emptor. There are three basic ways to protect intellectual property under Federal law. Patent, trademark, and copyright. Each protects different things, and has different underlying legal theories. Lets begin with pate…

Straight Frets in Austin has an excellent full-time position opening up soon. The job pays by the job, and equates to $70-85K a year for a tech that does: *neck resets *structural repairs *bridge making/reglues *refrets *headstock breaks with splines/airbrush We work on about 1,350 guitars a year (about 28-30 a week) and have had work shipped in from 22 different states at this point. We also teach setup classes on…

I have a Favilla Classical guitar on the bench, in for a bridge reglue. This is a low to mid-range classical guitar, made circa 1960, and it's an heirloom guitar for the customer, he basically wants it back in playing shape. The story is that he went away on vacation, and when he returned the bridge had delaminated from the top and took a fair amount of finish with it. It also appears that someone attempted to glob on superglue at some…

Well, I have exhausted all the internet can offer for options for a replacement bridge. The customer, long ago, removed a ton of material from the bottom(!!!!) of the bridge, and now that ive taken this guitar on as a restoration, its up to me to make a new bridge. I have found some ultra small pattern bits, and round-over bits to do the inside of the mustache flush, but I can not for the life of me decided how im going to cut the bulk…

I'm restoring an old parlor guitar. I have just discovered that it plays 20 cents sharp. Thats not in and of itself a mystery, usually. This guitar however has exactly the same distance from the nut to the 12th fret, and from the 12th fret to the "saddle" which is now a small shim under the two E strings both are 12 3/32"...with room in front of the bridge pins to finesse the location of the saddle slot, which I have not routed yet) I s…

Hello again folks, how is everyone! So I'm curious about what people here think about re-tops, who's done them, and what sorta ballpark rates you've charged for past completed jobs. I've got a bit of a wild one here, so strap in if you've got a couple minutes for story time! Back in 2012, I traded an HD28V of mine for a cool 1966 D-35 that needed some work. Basically, the body and neck of the guitar were fine apart from…

Hey All! I hope everyone has been loothing and living as well as possible. I'm checking in to ask for an opinion. I have been asked to fix or improve some top sinking/splitting of a Mahogany top 1930ish L-0 that sits between the bridge and the junction of the X-brace. It's showing signs of wanting to crack further but neither seems to be all the way through the top. I have removed the bridge plate cleanly and have tried wetting the…

Here's yet another acoustic guitar bridge tear off, this time the sound board came with and was damaged. The bridge is not damaged and can be cleaned up. But how would one go about repairing the sound board where the pegs? this is another skill building exercise - not a customers guitar. I included pictures of the bridge plate. If this has already been covered here, please provide a link. Thanks again very much to this great group…

Hi there! Working on a Squire Vintage Modified Jag. relevelled and crowned the frets. Lovely job. Set the relief and action to factory spec. So far so good. With a capo on the first fret, I set the string radius at the saddles to 9.5" using an under-string radius gauge, everything lined up nicely... ...but when I measured the action of all the strings along the 14th fret using my digital nut slotting gauge (expecting a unifo…

Greetings fellow Looths! I recently received a request from a customer to replicate Kurt Cobains 59 Martin, starting with a Sigma DM3. I have pasted the customers email to me below. While I have been a looth hobbyist for many years, I just recently opened my official business, Finger Lakes Guitar Works, and am just getting off the ground and a good flow of repair work is already coming in. While I feel 100% confident in my abilities to…