The Hub

I recently picked up a gutted first year Country Gent with a headstock break. It had been previously "repaired" with mystery glue, nails, bondo and believe it or not.....staples. I am likely out of my depth here but I want to bring this little bit of history back to life. I scraped off the bondo and that is when I found the staples hiding underneath. I removed the staples and gave the headstock some gentle pressure and found that the ga…

Today I have spent the better part of five hours attempting to get the fingerboard extension free on this guitar. I am using the method I have used for dozens of neck resets: 100 watt halogen bulb with heat shields. After a couple hours I thought I was making some progress under one corner, only to discover after some movement that my palette knife was going through the top. I then abandoned that area and have been applying heat and…

Hi Gang, I was finishing up a new guitar and discovered a rattle that I think is the truss rod. Strange that it did show up until now. I always rap on the neck to make sure the truss rod does not rattle before I begin finishing. Anyway, I finished the setup and was recording the final frequency responses (like Gore and Giuliano Nicoletti) and the rattle only happens when I tap the bridge with the sound hole blocked. Anyway, it sounds l…

I have a Buck here and miraculously the overlay is 100% intact, but it needs to be glued back on. Anyone have any experience with the best adhesive for this? Super glue will definitely melt it and make a mess out of it, but I seem to remember even epoxy reportedly reacting with the material. I’m thinking either celluloid glue like Martin used to use for pickguards or possibly even trying hide. Thoughts?

Love the new site, but I'm having trouble finding the Looth Group offers. In particular the hide glue offer you posted about a day or so ago (I need some). It would be handy to have a landing page for all member discounts, offers and promos.

This is a Suzuki violin company 'Three S' OM-style guitar, circa 1970s. This particular instrument was sold in the Japanese domestic market (my customer purchased it in Japan) but I've seen others in circulation here in Australia so presumably some were exported too. Sides and back are laminated rosewood, the top is solid spruce. Although this ended up being a relatively standard reset, I feel like this is worth documenting as prior to…