The Hub

I recently picked up a gutted first year Country Gent with a headstock break. It had been previously "repaired" with mystery glue, nails, bondo and believe it or not.....staples. I am likely out of my depth here but I want to bring this little bit of history back to life. I scraped off the bondo and that is when I found the staples hiding underneath. I removed the staples and gave the headstock some gentle pressure and found that the ga…

I acquired this old single cut JR around 6 years ago. Was aware of the previous breaks and repairs, wasn't a particular concern as I acquired through trade. The headstock broke a couple years ago with a very small sideways tumble ( in its case). I used some clamps and rubber tubing to glue the break back together. Decided to scrape back the finish and see at the previous repairs. I see epoxy, carribbean walnut splines, carbon fiber 1/8…

Hey all! First time posting around here, so forgive me if this has been talked through before, but I'm on the hunt for some jig plans for routing splines on headstock repairs. Thanks so much for any help or direction on this!