The Hub

Any suggestions if this can be saved? It is a neck I received for free upon replacing it for a customer. The wood was missing and the rod is missing the adjusting nut. The truss rod had pushed the inlay out as well as the wood damage . I wasn't sure if it could be a structurally sound repair. I have no idea of the neck rigidity or action with strings. I wont be online because of a previous dr. appointment but I figured it would be a go…

Hey yall! I am thinking through multiple options for preserving a large signature for a customer that is on the Front of a white Strat. I have done this a few ways before but never got to see much how they aged. What’s the general consensus for doing this sort of job? Thanks in advance!

A customer recently brought in a Gibson J-185-EC for some setup work, and also wanted me to address some leakage from a humidity pack the was apparently left in the guitar before he bought it, and it leaked in a number of places. I was wondering what the best way to clean this up from the inside? There's also finish lifting on the back of the guitar where it's leaked through the wood. I'm curious to know the approach here. I believe it…

Three evertune installs for this customer. This red tele looks great. Lots of tonal options with the DT Fluence set. https://www.instagram.com/reel/DVG-vEhkbDI/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== https://www.instagram.com/p/DVG-TLIEbWL/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==

I’ve had a customer come to me wanting to electrify the guitar without any modifications to it. No drilling, routing etc. I did convince him an end pin jack would be the only mod I would make, and he was ok with that. After a little thought, I thought, a K&K with a microphone (K&K Mini Pro) might work, using the transducers on the six string side and the microphone on the ten string side. I have no doubt the transducers would work fine.…

Hello all! I've moved across country after having a reasonable success loothing back in the USA, but upon arriving in my current location in Europe, i've had to diversify my skill set and take what i could to stay in the country. Anyway, its been 2 years since then and i'm slowly kicking up dust with repairs again, that i'm primarily supplementing with fix and flip guitars. But, i've hardly had any customers since arriving, outsi…

I've had a customer come to me wanting to electrify the guitar without any modifications to it. No drilling, routing etc. I did convince him an end pin jack would be the only option, and he was ok with that. After a little thought I thought a K&K with a microphone (K&K Mini Pro) might work, using the transducers on the six string side and the microphone on the ten string side. I have no doubt the transducers would work fine. My concern…

Hey everyone, I wanted to do a bit of a follow up on a repair I'm doing. A customer brought in a Seagull acoustic guitar that had been dropped, causing the heel block to separate. I managed to get that glued back together with pleasing results, however I did need to take the neck off by removing the two bolts which thread into the heel block, and unglued the fretboard extension. All went well here, although I'm left with a situation whe…

Customer has this Martin 000-RS1 that needs a neck reset. He's looking to me for advice because he knows the guitar isn't really worth that much. But it's unplayable at the moment. What are you chaps doing for guitars like this? A real cheap, old guitar, I'd just hack the neck off, but this doesn't really fall into that bracket either. Are you doing proper resets on Mexican Martins?

I’m curious to hear from everyone in the trenches, how they manage repairs they really don’t want to do. At this point I am offering customer work again to a small group of people who know me and have worked with me over the years. I’ve had a few people email that I don’t know, being a little pushy wanting to know price and turnaround time because “I need this by the xxth of the month”. I’ve simply offered them a referral to another sh…

This is a new one for me and I’m willing to give it a shot with the customer’s understanding. What are some things that I need to look out for and what do I prioritize first… I’m up for it but I want to be efficient. Thanks for any tips/advice!

We at F Bass Inc have been crafting boutique basses out of Hamilton, ON since 1978 and we’re looking for a Master Builder to join our small but mighty team. Applicants must have a sharp eye, strong organizational skills and the ability to problem solve in creative ways. Someone who genuinely loves crafting custom instruments and appreciates the little details even more so. If you pride yourself on precision and creativity and get a kick…

Just received these sandpaper rolls from Red Label. 4.5"x60' cloth backed aluminum oxide. Killer deal at $15 a roll (about 30% of normal price). Quality is excellent. Various grits available. Don't know how long the deal lasts. https://www.redlabelabrasives.com/products/4-1-2-inch-x-20-yd-roll-cloth-backing-aluminum-oxide?utm_source=Customers&utm_medium=email&utm_campaign=1%2F6%2F26%20-%20Bulk%20Surplus%20Reminder%20%28Customers%29%…

A customer recently brought in a 1950s Gretsch Town & Country Rancher 6021. In addition to two main ladder braces being loose/cracked, it’s missing the two braces on either side of the sound hole (see photo). Because this is such a wide instrument (17” lower bout), I’m thinking that installing those missing braces will help with the stability of the top, which is pretty sunken right now. Does anyone have any photos or measurements of or…

Hey everyone, I'm dealing with a Seagull acoustic guitar which has a neck design that I'm unfamiliar with. It has a bolt on heel but a seemingly glued in neck. The customer brought it in when his child knocked it off that stand and created a gap between the heel and the neck. It doesn't appear that these pieces were glued together so I'm guessing that I'm safe to just fit the heel and screw it in. I am a bit worried about a gap remainin…

Hello all, A customer dropped a recent American Professional II Strat to have a Double-tap humbucker installed at the bridge. I rewired the guitar following Fender's schematic (see below) and installed a stacked 250 and 500k volume pot, treble bleed PCBs and push-push coil split/tap for this pickup. All went very well, until I tried it at switch position 2. Sure enough, the new unit does not play well with the others and combining delive…

A customer brought this Gibson songwriter deluxe in, it’s approximately 20 years old to his recollection. It needs a few things done including fret work and a bridge re glue. At some point the guitar was lent out to a friend who dropped it then tried to fix the finish themselves. It looks like they used some kind of cleaner or something that didn’t get along with the lacquer at all. I’ll attach pictures but it’s kinda hard to get a pic…

I bought the O'brien vacuum clamp and a pump to clamp bridges on new builds, but also to use for repair work. I got tired of making custom top and bottom cauls for every odd-shaped bridge that comes in my shop. The vacuum clamp works great on a flat surface with no pick guard. I put it on a J45 with a pick guard, and it won't seal. The gasket is too hard to form over the pick guard. I've seen YouTube videos of other folks using vacu…