The Hub

This is a local musician's main acoustic. It's a 2014 Gibson J-29. As you can see the bridge was lifted when I got it, and the top has been pulled up into a bulge. The bridge came off pretty clean, but I noticed how the spruce broke behind the pins. I didn't score this side of the bridge, but it looks like it must have been scored for the wood to break that cleanly. Could this have come from the factory like that? I don't know why Gibso…

Customer brought in on this '70s Gibson Heritage acoustic with severe bridge damage. I need to replace the bridge, but I don't have the tools to cut or design one in shop. Any help would be appreciated.

I had a customer contact me and he told me that he has a Zager ZAD80CEOM and that the bridge is staring to raise at the back. He says the gap is about 1/32" and would like me to remove the bridge and reapply it. I have yet to see the guitar in person and I'm a bit hesitant to take it on. I've never performed this type of operation before, although I do have some theoretical knowledge of it, just not practical. Some of the question I hav…

I recently picked up an inexpensive acoustic with a belly bulge and lifting bridge for some repair practice. I got the bridge off and used the TJ Thompson belly reducer to reduce a lot of the bulge. However, some of the wood stuck to the bridge during removal and the wood left on the guitar is now uneven and has some chipping. Should I remove the wood from the bridge, carefully remove wood from the top of the guitar to get the bridge area…

Acoustic Vibes Music is looking for a lead tech that would primarily be working on Martin and Taylor warranty issues. We are a Martin and Taylor Warranty Service center. So everything from Setups, to making new nuts/Saddles, minor finish repair, refrets, binding repairs, cleating cracks in tops, Pickup installation, strap button installation, pickguard removal and installation, bridge removals and reglue, level crown/polish, and oc…

Hello looths worldwide ! I once heard on the Loothalong Grace talking (figuratively) about for a list of all the things thay may cause rattle in a guitar, and after fighting with a setup lately I'm in for starting this list, from the headstock down : - Old strings : replace the strings. - Loose tuners : tighten the ferrules, tighten the screws (on the buttons / on the axis). - Nut : create a funnel for the strings to ease the path to the t…