Search the Hub or by author, or tap a filter to narrow the feed.
I have a Rickenbacker 620 on my bench; I have repaired the neck pickup (it came loose, uninstalled) and I am stumped with where the wire should dip into the control cavity. There is no hole in the route for the magnets, I assume it runs under the floating pickguard, but I dont see any relief or path under the main control panel. This has the toaster style pickups and dates to the 50's. Thanks in advance.
Has anyone used this? I bought one and my first P90 wind wasn't worth a sh#t! Uneven winds and the coil was way too loose. I have no trouble winding while feeding by hand except that it drives me crazy staring at the winder.
Hello looths worldwide ! I once heard on the Loothalong Grace talking (figuratively) about for a list of all the things thay may cause rattle in a guitar, and after fighting with a setup lately I'm in for starting this list, from the headstock down : - Old strings : replace the strings. - Loose tuners : tighten the ferrules, tighten the screws (on the buttons / on the axis). - Nut : create a funnel for the strings to ease the path to the t…
