The Hub

In the process of evaluating the repairs needed on this guitar I checked to see if the truss rod was working. There is hole in the transverse brace where you would normally insert a truss rod, but all I see is the end of a metal bar with a smallish hole in the center. I tried several allen wrenches that would fit in the hole, but nothing seems to grab. Did they really eliminate the adjustable truss rod on this vintage reproduction? Here'…

Refretted my Yamaha Studio Lord 550 with jumbo frets. This is my second fret job. First was on a bolt-on BC Rich neck. The Studio Lord (Les Paul copy) was my first set neck project. It is pretty good. No fretting out. I set the action at 4.5/64 on bass and 3.5/64 on the high strings. Today I noticed that if I bend a high F to G (13th fret on first string), the note frets out (I can get to F # no problem by bending from the 13th).

Hi Everyone, What do you feel is the best way to remove the file marks from the frets after leveling and crowning with a fret crowning file? I'm happy with the shape and overall feel of the frets after crowning so this is an aesthetic issue more than anything. These are the files I'm using. The centered versions of 150 & 300-grit: https://www.stewmac.com/luthier-tools-and-supplies/types-of-tools/files/stewmac-compact-z-file-…

Looking for a luthier that can work on old Martin Ukuleles with bar frets. Please send suggestions

Hey all, I have a customer that brought a mid 2000's Gold Jazzmaster to get a suggestion on what to do to the neck of it. On the Low E side of the neck it has about .08 relief, while the treble side is at .05 relief, and the truss rod is maxed out. He has had several other well known luthiers in the area work on it, one of them tried a fret dress and a setup that only fixed it for about a month, and the other one heated the neck to add…

Is there a Pneumatic Fret Tang Nipper out there or did anybody ever combined a Tang Nipper with a pneumatic Plier? Or maybe it is possible to take the Stewmac Tang Nipper (i like the new version) and modify it? I always make 20-40 Sets of frets ready so i can make a lot of fretboards ready in one day. But after a while my hand really hurts. Thank you

Hi everybody, I have a Maton EBG808C TE Tommy Emmanuel Cutaway Ebony Fingerboard in my shop for a setup but the instrument is also in need for a partial refret. The customer agreed to do that. Now, is there someone here that did this before that can help me to choose the right fret type for this job? On an average I have 0.080" width and 0.040" height for the original frets Thank you :-)

This is a simple but effective setup for cutting fret slots quickly and accurately. Ryobi table saw with a crosscut sled and saw blade with a kerf to match fret slot thickness. The sled has an indexing pin for using fret scale templates with notches. The blade alone sells for $163 on Stew Mac. I also have another blade for sale.

I'm nearing the end of my first build. I have about 1 mm gap above the top at the end of the fingerboard extension. I've read and seen some guidance to clamp that down while gluing the extension. Others seem to build in a wedge-shaped shim - although it seems that is mostly done with neck resets and not new builds. A straight edge on the frets is just slightly above the top of the bridge so I think my neck angle is good. What are your t…

Please can I see some quick cauls for dealing with fret pressing at heel transitions? For pressed / glued in frets or clamping down lifting fret ends in this area. I’ve tried a few different methods now and not entirely happy with any of them

I have an epiphone 335 style guitar on the bench right now. Bad fret buzz on the first frets. No relief in the neck. Pretty Clear its a trussrod adjustment and out the door it goes. But the truss rod is stripped out pretty bad. My 4mm allen fits, in but it has a lot of wiggle. My 5/32" allen doesnt slide in all the way. I dont have a full set of torx wrenches. But i thought that might get some grip. What is the best way to get this thin…

I'm fairly new to CNC and am attempting to set up for a fretboard carve. I'm using a one year old ShopBot Desktop Max. This is the first I've found a problem like this. I made some practice blanks and thought I had everything the way I wanted it until I measured me fret distances. Using calipers from the nut to the center for the first fret slot I get 1.399" and I'm expecting 1.4346. I brought up the file and used the measuring too…

Hi everyone, I am getting closer to finalising the specs for the first production run of the Untangler Pro. The Untangler Pro is made of stainless steel, and it is designed to clean up the underside of fret?s overhangs after clipping away the tang. It works with a Dremel or similar tool and a cutting wheel. The order for the parts needed for the first run will most likely go out next week, so if you want one, now is the time. You can mess…

Hi, does anyone have experience with Stainless steel fret wire on acoustic guitars or more specific on classical guitars? Up to now I only used the traditional Nickel/Silver fret wire but recognised that after a few months they start to get mat or tarnish despite polishing them. I wonder if that is because of the origin (Producing Company) of the fret wire or due to the alloy? During my search for fret wire that is not Sintoms and also av…

61 year old Stella Harmony with brass frets. Fret board is poplar. It needs refretting and I want to try doing it myself given the cost of the guitar was $70 bucks, hiring a pro will cost way more. Any recommendations on Fret wire? I can't find Fret wire that is an exact match. Current frets are 1 mm wide, a hair over 1 mm high and the tang looks to be 2.5 mm deep. Has anyone regretted one of these guitars?