The Hub

I've seen mention that mandolins can be held in the PWS, but haven't seen any good examples of how to go about it here or in the Total Vice materials. Having just started using one, I'm having a hard time coming up with an acceptable solution on my own. Any experienced advice will be appreciated!

Hi All, I wanted to check in with folks in the industry and ask for some advice. I have been on a building Hiatus for a number of years now (Hand Injury, Medical Issues). Things have gotten much better, and I am fully able and capable of building once again. The 2nd biggest hurdle I have had was a lack of opportunity for shop spaces to build. I now have a viable workspace and full use of my hands once again to build. The problem is that, o…

@member hipped me to the fact that Steve Gilchirst has some really nice work detailed in his restoration archives. I think you should check it out. BTW he is super busy, so don't wear him out with emails.

Hello All I have been using Ted Bergstrand's online nut calculator on Benchmuse.com which is excellent. It allows you to have a consistent gap between each strings vs the progressive gap that the Stewmac rule gives you. Or you can do consistent centers to the strings. I have definitely found measuring the nut with calipers to work a lot better than the stewmac rule and don't use the rule anymore. I wanted some additional functionality…

Here are some pics of 1918-1922 Gibson A3 "Ivory" Mandolin Dovetail Joint Measurements and Angles.

I am building an archtop mandocello (A style) and I'm trying to find out how to make the neck block. It would be more or less like an A style mandolin neck block, but obviously quite a lot bigger. More or less like the image attached. The blank should be aprox 10 x 8 x 12 cm. I'm trying to find a piece of hardwood big enough for this, would it be acceptable if I made some kind of laminated piece? And how should the grain direction be idea…

A customer brought in a Gibson ivory top A3 mandolin. It's in good shape and has all the parts. He found it at the local thrift store here in Bishop. He wants it mechanically sound. Here are the problems: 1) Everything that comes into the shop has a shrinkage component and the effects of course very from instrument to instrument. This instrument is no exception and the results of that shrinkage, in this case, are severe. The top, ba…

Just posted a full build video for the last mandolin batch over on YouTube. Give it a watch folks, its 25 mins long. And there should be a few woodworking tips there for some of you, and some lovely tunes all played on my work.

I'll open by saying I know nothing about varnish finishes, yet. I've seen this Brentrup mandolin with a varnish finish that has extensive lifting/flaking around almost all edges. Is there a process/chemical for consolidating varnish finish like this? (beyond the brute force GluBoost wicking I might usually do) In any of the violin video sessions, has this type of finish repair been discussed?

I’m working on many more mandolins these days, and I absolutely love my Frank’s Cranks by Frank Ford (Gryphon Strings) for guitar work. I’m hoping to track down one of the smaller mandolin-size string winders. If you have one sitting unused, please send me a message.

Hi everyone, I'm Martino from Hub of Acoustics, a collaborative project created by luthiers for luthiers. Our goal is to explore and teach acoustic principles that are directly relevant to instrument making. In 2026, we’ll be running four courses in different parts of the world, all focused on giving luthiers practical tools to better understand and control the acoustics of their instruments. We’re excited to introduce our very…

I finished levelling frets on a mandolin last week, and was surprised that the frets with the worst divots worked down to .020" Had I known that I'd go that low, I might have replaced them, but it's hard to measure divot height, especially those caused by thin strings. I haven't seen much discussion on standards for fret height or guidelines to know at what point should I switch from levelling to replacement. What standards are peop…

I replaced a broken trussrod in a mandolin today, and after gluing the fingerboard back on I was surprised to feel a small ledge on either side of the board suggesting that in the 3-hour period since removing it, the board had shrunk over its width. It was definitely flush before I removed it, and I used the same locating pins as the original builder, so it can't have shifted. Is it possible that the board could have shrunk that quick…

So, I made a modular clamp based on the split clamp idea. Started on a prototype about two months ago and finished it. What I was aiming for was a clamp that I could use on the BOTTOM of acoustic guitars as well as tops to clamp cracks, cleats, braces, patches etc. Especially a clamp that would access small openings like "F" holes, small sound holes etc. Essentially a way to get a clamp to areas not accessible to jacks, wedges etc.,…

For my current mandolin build, I set out to answer 2 questions: 1. Whether to use physical deflection or frequency analysis to measure stiffness, and 2. How well can I measure wood quality in rough sawn form? (T. Gore says it needs to be planed smooth and rectangular for frequency analysis.) I have 4 different topwood species available for my current build: California Sitka, Englemann, Lutz, and Coastal Redwood. The billets range from 37…

I've been building up my "2 car garage shop" for about 10 years preparing for retirement from health care. This spring I finally quit punching the time clock. Over the same time I've build 13 mandolins and 4 guitars. Now I pretty much have all my tools in place and enough wood stored to build for quite some time. My work benches are built with a heavy door for a top and base cabinets I scavenged from work. Lately I have toyed with the i…

A friend of mine gave me his locally built mandolin for a neck reset. The glue in the dovetail has started to fail, and left a large gap at the bottom and a separation from the fingerboard and body. I've taken my brownstone and tried to heat the joint up enough to soften things up, but to no avail. I have no idea what type or where the joint is exactly. There are some indicators that this instrument was built with several flaws in the c…