The Hub

in for some top cracks and playability issues, neck is underset by almost 1/8" with significant hump at the joint...just got the strings off and got a better peek under the circus tent and... how the what the why? i just... really I... ummmm....can anyone guess what is going on here? Tempted to hand it back over any half-measure foolery. Third Japanese built one in this year but I've not seen this sort of hijinx...

Hi all, I got a Do Santos DSMSCC RC in shop, the Spanish heel has failed , or rather collapsed into the soundboard, splitting it on both sides along the grain, a broken brace just under the fingerboard extension , cracks on both sides on the top/side bindings, I measured wood humidity on the fingerboard 9% and inside the (very inaccessible) body 11% The normal procedure would be to re-humidify before jacking or clamping back into place ,…

A customer brought in a Gibson ivory top A3 mandolin. It's in good shape and has all the parts. He found it at the local thrift store here in Bishop. He wants it mechanically sound. Here are the problems: 1) Everything that comes into the shop has a shrinkage component and the effects of course very from instrument to instrument. This instrument is no exception and the results of that shrinkage, in this case, are severe. The top, ba…

All - looking for recommendations on overall approach for repairing this nasty side crack right at the edge of the tail block. My initial thought is that either the top or the back needs to come off in order to properly glue and clamp the main split. Thanks in advance. Images

Im 6'-6" with hands to match. I can squeeze my hands into most flattops, but a friend asked me to look at his 1930's Tiple. It has multiple back cracks that I can get to with props and TJ's crack system, but there are also plenty of loose braces. Looks like I've got to pop the back off, but I feel the long back cracks should be stabilized first. Would you hesitate removing the back? or is there a way to address the loose braces from out…

Hello again folks, how is everyone! So I'm curious about what people here think about re-tops, who's done them, and what sorta ballpark rates you've charged for past completed jobs. I've got a bit of a wild one here, so strap in if you've got a couple minutes for story time! Back in 2012, I traded an HD28V of mine for a cool 1966 D-35 that needed some work. Basically, the body and neck of the guitar were fine apart from…

Good morning to all - I have another skill building question - picked up another cheapo electric guitar to practice repairs on. I didn't see the big dent, but figured its an opportunity to practice another type of repair. big chunks of polyurethane finish are gone and the bit that's left has a hairline crack around the bottom. I'm thinking to use wood filler to fill in the missing chunks, and want to know if its best to remove the piec…

Hi all, I'm new here. I've been playing guitars for ~15 years and recently started as a technician at a music production school in London, where part of my job is maintaining the guitars. I picked up this 50s parlor nylon the other day and it's in bad shape but I don't know how to go about repairing it. The main issue is the bridge. The guitar was kept high strung and the bridge has twisted and lifted off slightly at the base. T…

I recently picked up a used custom guitar that the seller said he bought in Vietnam Nam many years ago. I bought it as a wall hanger due to the wonderful Mother of Pearl work, especially on the back. It was very apparent that the top on this instrument was sunken at least 3/8 of an inch, as the weird bridge setup was heightened to the max and there was barely any action height. Once I took it apart and removed the foam inside, I was…

This jazz bass has come in with a cracked and separated fingerboard near the nut. I believe this is an early Bi-Flex but am not entirely sure or familiar with them. The truss rod is functional and tightens up when turned. Top of the walnut plug is missing and the washer appears to be crooked or dislodged. Not sure what purpose that washer serves. This is probably the thinnest bass neck I’ve ever seen and it’s no wonder that this fingerb…

(Just to set expectations, I bought this for the sole purpose of learning. Not a client project) I got this Martin D28-12 in destroyed condition, after an airline did something awful. As I see it: - Top cracks - Back cracks - Top & side separation with some broken off kerfing - Brace ejected When I was looking at the pictures online pre-purchase, I thought I might take the neck off and re-top it, or at the very least, take the top off and fix…

I watched the Guild F-20 video (https://dev2.loothgroup.com/groups/repair-and-restoration/forum/topic/cracker-x-braces-on-guild-f20/#post-60310) with great interest since I've been working on a Gibson L-3 with a similar problem. A little back story - The original repair request was to address a small pickguard crack on the sound hole side. After peeking inside, I saw 5 loose brace ends on the treble side. Still a pretty standard repair…

Hello fellow looths! I recently had a customer come in with a '71 Fender neck that is a fusion of the 60s and 70s style. It has a veneer fretboard, no skunkstripe, 4 screwholes, 70s style tuners, 70s headstock logo, and it seems like it has a poly finish on the back of the neck, and nitro (with cracking) on the front of the headstock. Can anyone tell me if this combination is possible or could it be fake? Another thing is, even without th…

Okay gang I have a doozy of a crack repair. Young guy brought in a Epiphone LP Limited Ed. He had picked up the case while it was unlatched at the guitar took a nasty tumble. Severe finish damage, and the wood has a shear split in it as well. The undercoat is thick with a thin layer of nitro color on top. Spoke with a sweetwater rep and they said that the finish was nitro. Here's the guitar specs via Zsounds: Epiphone Inspired by Gibson…

Im going to attach some photos of a 000-style guitar from Potomac(I believe an Eastman product) that has some top cracks and deformation around the neck block from what I assume to be a shift of the neck block. How do you all approach repairs like this. Im thinking that pulling the neck and somehow pushing the block back into place from the inside is about the right course of action, but if anyone has some advice, Id appreciate it! In th…

It was only a matter of time before one of these arrived on my bench. The neck on this 71 SG Deluxe is caving through to the neck pickup cavity— In a similar fashion to what happens on old jr’s. Both sides of the cutaway have cracks that extend through to the pickup route and I can flex them easily. Problem is that the cracks are not straight and wander all over. I worry about being able to get enough glue in there because of this. Thin…

In the process of evaluating the repairs needed on this guitar I checked to see if the truss rod was working. There is hole in the transverse brace where you would normally insert a truss rod, but all I see is the end of a metal bar with a smallish hole in the center. I tried several allen wrenches that would fit in the hole, but nothing seems to grab. Did they really eliminate the adjustable truss rod on this vintage reproduction? Here'…

So this 46' J-45 came to me at a very very low price as it needs extensive repair. Much that I am confident in, cracks, bridge/bridge plate issues, loose braces and the like. There are however a few points that id like the groups opinions on. The neck angle is pretty great and theres a good amount of fret, however, at some point in its past, someone shaved down the neck to a dangerous point, and the back of the neck has toms cracks along…