The Hub

Hey all, I have a customer that brought a mid 2000's Gold Jazzmaster to get a suggestion on what to do to the neck of it. On the Low E side of the neck it has about .08 relief, while the treble side is at .05 relief, and the truss rod is maxed out. He has had several other well known luthiers in the area work on it, one of them tried a fret dress and a setup that only fixed it for about a month, and the other one heated the neck to add…

I have an epiphone 335 style guitar on the bench right now. Bad fret buzz on the first frets. No relief in the neck. Pretty Clear its a trussrod adjustment and out the door it goes. But the truss rod is stripped out pretty bad. My 4mm allen fits, in but it has a lot of wiggle. My 5/32" allen doesnt slide in all the way. I dont have a full set of torx wrenches. But i thought that might get some grip. What is the best way to get this thin…

Hey all, I’ve got a Prewar Martin on my workbench (1932/33 0-18) and this thing has unfortunately been through the guitar center wringer. I’ve had to reset a fretboard that was glued down with Gorilla glue and as well, rejoint the neck and underside of the fretboard. I had to repair a large deal of tear out that was sitting underneath their fret job and because of that I now have a brittle fret slot all up the board that will not hold a fr…