The Hub

I am a retired dentist. One saying we had was, “You can’t fix what you can’t see.” And another was, “The day you start working with magnification will be the best and worst day of your practice.” The worst because you will see what you have been missing, and the best because you will never miss it again. So even though I have my Dan E. Model visor loupes, and my retired dental loupes on throughout the day, sometimes, it’s not enough. I pi…

Dovetail was 9/16” deep, and 1 9/16” wide at the back. 15th fret was 1 mm tail side of the end of the dovetail socket but a slight angulation towards the headstock landed in the right place. Hide glue, released easily. Nice everyday player, finish and binding beautiful, good spruce top, warped poplar neck.

Guitar fell straight down on the headstock when it was hanging up at the refinishers. Shit really does happen! Grain is pretty much shattered around the adjustment nut. Thinking I’ll replace the entire broken area with a completely new piece of mahogany. Scarf it in between the volute and 3rd fret. Probably even a 3 piece lamination to mimic the neck. This one was not the clients fault so the expectations for looking close to original a…

Any tips on handling the off-gassing for vintage guitars? I just took in a 1941 D'Angelico. The original tortoise shell pickguard is gone and has been replaced. New case as well. The frets up the neck are going to need to be cleaned. But are there any other precautions I should tell the client to take? Anything I should take into account? -Mike

I've got a client with a '72 Tele. It needs a re-fret, but the truss rod isn't functioning. In fact it's backed out of the channel significantly, and there's a bulge in the neck underneath the first fret which suggests to me there's something going on with the truss rod anchor. The puzzling thing is the wood in the neck has bulged, but the skunk stripe and the finish don't appear to be disturbed at all. I'm thinking I'll probably hav…

Hello, I just received an unfinished, slotted but not fretted maple neck from Warmoth. I believe standard practice is to fret then finish but I’m curious if it might be better finish before fretting? I understand one would want to prevent finish from entering the slots. I’m and going to use tru oil and do a light finish, maybe three or four light coats. Thoughts for this beginner? Dave

I've owned this Jersey City made 12-string/drone 'harp' guitar for a few years and want to get on the repair. I've taken the necks off many dozens of Schmidt-made guitars but never one with two necks. I've searched the web looking for harp guitar neck removal and didn't find anything of use. Asking for any tips/aids/experience from the loothers. My plan is to make a custom neck removal jig that fits the necks, and then drill the typical…

Hi, I am still a little confused by the new look of the forum, hope this is the right place to ask. Which fretwire would you recommend for a refret of this 70s LP? The current frets are 2.75mm wide, but dressed down to 0,35mm height. I have heard storys about frets that are this low but never seen in real life before :-) (0.108" wide and 0.014" height). Thank you in advance :-)

Few more prints up for grabs to anyone in the US who responds first. Fret sander and two screw holders with the gridfinity lobbed off so they are just free-standing.

Hello, I hope everyone is having a great 4th of July weekend so far. I was recently asked by a friend to work on a cheap S101 bass someone had given to him. It had no electronics and it was severally back bowed. After finishing up the electronics, I did the set up. He wanted the guitar tuned low, to Drop C. So, I went out and bought some Ernie Ball Power Slinkies 55-110. Once I got to the nut depth check, it was clear there were large, g…

Howdy folks, I'm a 2026 graduate of the two year guitar program at Red Wing (Minnesota State College Southeast). Between my two years at Red Wing I worked at Collings Guitars in Austin, TX for two years in the acoustic neck department, shaping and finish sanding ~2000 necks, radiusing and gluing ~750 fingerboards, and pressing ~100 sets of frets. I also spent a couple months in the finishing department level sanding and pore filling ~300…

(for background context, I'm probably in the dozens of fret jobs so far, and no I don't let frets leave my house like this) When I got started getting interested in building guitars, I got the StewMac bundle of fret files/book, which comes with the concave toothed file. Over time, I ended up getting both the Narrow/Medium and Wide/Jumbo files. I don't do it often, but occasionally I do something like shown in the picture, where I'm clearl…