The Hub

Looking to get a custom fingerboard slotted, radiused and cut for block inlays, preferably in Canada. Any leads much appreciated! 🙏

Hi friends, I was at a colleague's shop this morning. He’s a pretty well-known builder. A customer has asked for names (several… grandchildren, you know) being inlayed in abalone in a fingerboard and he’s feeling out of his depth for this task. I have volunteered to help find a colleague who'd be willing to do it. Anyone interested in doing this? Any recommendations for a talented colleague? Thanks friends.

Any suggestions if this can be saved? It is a neck I received for free upon replacing it for a customer. The wood was missing and the rod is missing the adjusting nut. The truss rod had pushed the inlay out as well as the wood damage . I wasn't sure if it could be a structurally sound repair. I have no idea of the neck rigidity or action with strings. I wont be online because of a previous dr. appointment but I figured it would be a go…

Hi, I have a 1950's Gibson LG-3 that's had some poor work done to the spruce under the area of the bridge where the spruce has pulled away and or been sanded excessively. It's missing about .020-0.30 thou of spruce and I'm wondering/looking for advice about how to go about splicing in a thin piece of spruce before I re-glue the bridge. Please see pictures attached. My main questions are: glues for the patch, should the patch be mitered…

HEy Folks, Just wondered if anyone had a source for a 4-inlay SJ200 bridge? I have a 52/53' in for restoration, and...well... I like replacements better than making them if I can help it, especially this mustashio'd monster!

Hello! This is my current build! https://www.instagram.com/p/DMO6PqXRAkg/?utm_source=ig_web_copy_link&igsh=MWdhbW4wdG51bDJ4ZQ== "Here’s a quick check-in on the two guitars I’m currently working on. The bodies are getting ready for binding(arm bevel too!), while the neck is in the middle of headstock design. For the tiger-patterned guitar, I’m planning to inlay Jakho-do (Korean tiger-and-magpie painting) with mother-of-pearl. The other one…

I'm refretting an all-original Gibson L-7 from 1934, and it has a 9.5" or so fretboard radius. However, the bridge, also original, has a 12" radius. I need to flatten the board, as it has a hump at the tenth, but I'm wondering if I go with the 9.5" radius, or try and get it to 12". I'm a little worried about sanding through the Nick Lucas style inlays, so I'd like some input here. If I kept the 9.5" radius, I'd likely have to radius the…

Hi all, Not sure if this post should go here. I usually do a simple inlay on my guitars like the one in the picture, nothing complicated. I used to have access to a laser cutting machine, but I can't use it anymore, so I do it by hand and I always get some slots that I have to fill with glue and sawdust, so it could look better. Does anybody know any online courses on inlaying techniques? I would like to improve mine. I know Robbie O'Brien…