The Hub

It was attacked by a Martin Dreadaught on a small mountain stage resulting in a faceplant. The top is Redwood. I was able to get it to glue up fairly well and have done some splice and drop fill on the vertical cracks. I'm curious about suggestions for the deep cross grain areas. I am hoping to not re-shoot any lacquer and just rub out the finish with some Kovax dry sanding. It was never high gloss buff to begin with and it's a personal…

Hello looths! Long time lurker, first time poster here all the way from New Zealand. I have recently acquired this 2008 Martin D-35 for a very cheap price ($1000 NZD - around 600 US!) it's dried out in a very cold environment and has two substantial cracks running all the way across the top, one large side crack, and a previous side crack repair that's been done quite poorly. I'm only about 3 years in to this repair journey and this is d…

Long story short, customer want to add carbon fiber in the neck for strength. Without string tension, the neck is dead straight; with strings, it's about double the relief he'd like. Is it insane to add carbon to this guitar? Or is it fine?

Thought fellow looths might enjoy this geekery. I've often wished for custom size heating blankets, but didn't even try uploading the file to get a quote from some of the major manufacturers. I was looking to spend countless hours of my life on something and save a hundred bucks. So I did some research, a little bit of head scratching, a slight bit of math reckoning, and made this '70s Martin bridge plate remover. Pretty slick, nice…

Anyone know what glue type is appropriate for a Martin DXME fretboard extension to secure it to the plastic laminate top (or whatever it is)? I have one on the bench that has broken loose, and I’m not sure what to use. I tried contacting Martin, but they won’t help since I’m not an authorized Martin repair shop. 🫤 Thanks!

Hello again folks, how is everyone! So I'm curious about what people here think about re-tops, who's done them, and what sorta ballpark rates you've charged for past completed jobs. I've got a bit of a wild one here, so strap in if you've got a couple minutes for story time! Back in 2012, I traded an HD28V of mine for a cool 1966 D-35 that needed some work. Basically, the body and neck of the guitar were fine apart from…

Hi folks. I have a Martin DX1 in for crack repairs. I was feeling around and discovered two huge cedar plates glued to the top. Many gluey fingerprints and spots which leads me to believe they aren’t stock but want to make sure before I remove them. I looked online for a bracing diagram but no luck. Does anyone have any info on this? Much appreciated ! Images

Greetings fellow Looths! I recently received a request from a customer to replicate Kurt Cobains 59 Martin, starting with a Sigma DM3. I have pasted the customers email to me below. While I have been a looth hobbyist for many years, I just recently opened my official business, Finger Lakes Guitar Works, and am just getting off the ground and a good flow of repair work is already coming in. While I feel 100% confident in my abilities to…

Hello, One of my commissions is coming down the pike and it's going to be my first time using bar frets. I could use a once over for any helpful tips if you have any. About the guitar: Aged HD-28 but mahogany back and sides. I think Martin called this a HD-28 M? Skipping the truss-rod and using two carbon fiber strips. My process for Frets: 1: I CNC my fingerboards to a 16" radius and for T-frets I use a .023" to cut slots with a mat…

Customer has this Martin 000-RS1 that needs a neck reset. He's looking to me for advice because he knows the guitar isn't really worth that much. But it's unplayable at the moment. What are you chaps doing for guitars like this? A real cheap, old guitar, I'd just hack the neck off, but this doesn't really fall into that bracket either. Are you doing proper resets on Mexican Martins?