The Hub

Hey folks! I picked up a neck relief gauge from Doug in one of the earlier batches, maybe the introductory run? Some of the small feet caps that thread onto the moving legs of the tool have cracked, broken, or become worn down. I contacted StewMac about purchasing replacement parts, but they don't sell subparts for the relief gauge and otherwise won't help me. They appear 3D printed, so I was wondering if anyone with the means to print s…

I've built a number of classical guitars with an adjustable neck and they seem to gather quite a bit of interest, so i'm currently in the process of looking to refine the design and build. It's quite a simple construction where the neck is held together by string tension and hangs on a pivot. I developed a 3d printed "socket" which acts as the interface between the body and the guitar and allows for some fine tuning of the alignment of t…

Few more prints up for grabs to anyone in the US who responds first. Fret sander and two screw holders with the gridfinity lobbed off so they are just free-standing.

I’ve been speed modelling parts with the printer running 24/7 since inception. There are currently somewhere around 75-100 individual pieces modelled in my source file. Mostly only building on what I’m considering the X axis, but it’s Freeform so I’ve used them to build out Y.. anyways… Connectors, Extenders, Couplers, Links, Sleeves, Feets, Plugs, Panels, Hooks… and on and on. In a moments time, I will have a mass drop folder of Standar…