The Hub

Hey all, I have been working with the work station for a few months now. I love it. I found a few little things that have helped me. 1. A mic stand to support the main beam. I bought the Total Vise version and it didn't work as well. 2. Rockler Bench Cookies as rear cross member supports. They have the correct 5/16-18 inserts in them and screw on easily. Now the thread rod has a sort of hi/low setting by just flipping it for acoustic or…

Hey folks! I picked up a neck relief gauge from Doug in one of the earlier batches, maybe the introductory run? Some of the small feet caps that thread onto the moving legs of the tool have cracked, broken, or become worn down. I contacted StewMac about purchasing replacement parts, but they don't sell subparts for the relief gauge and otherwise won't help me. They appear 3D printed, so I was wondering if anyone with the means to print s…

Please, if you see something, say something. If you want something, ask. Bugs, wishlists etc. Stack them up here.

Great Tool. Great Benchy. Testing Threads, Sliding Dovetails, Overhangs, and it’s actually useful instead of that boat.. so testing wear resistance too. igus iglidur I151 Thanks for the model @member

Hi folks, I thought you might be interested in this approach to having easy height adjustment for a GoBar deck. I learned this tip from my buddy, Don Parker. He lurks around here too from time to time. :) The basic idea is rather than having a booster platform on the base for use when gluing braces to plates you bring the roof down lower. There is a 3D printed spacer in black in the pics. I linked to a downloadable STL and 3MF of…

Hey everyone, I wanted to do a bit of a follow up on a repair I'm doing. A customer brought in a Seagull acoustic guitar that had been dropped, causing the heel block to separate. I managed to get that glued back together with pleasing results, however I did need to take the neck off by removing the two bolts which thread into the heel block, and unglued the fretboard extension. All went well here, although I'm left with a situation whe…

i have a 2010 g&l asat bluesboy with a loose barrel jack. which is to say, when a cable is gently unplugged the jack comes out of the body. there is no nut on the inside of the control cavity to hold the jack in place - it looks like the wood itself is threaded. the jack barely protrudes into the control cavity so i don’t see an obviously good way to get a washer and nut on it. any ideas outside of enlarging the hole and installing a jac…

Hey! So I've got a customer who has dropped off with me one of the nastier headstock breaks I've seen in recent memory. There is excess glue of some sort (rock hard, clear) all inside the break, along with the threaded tracks of the screws. I'd usually just recommend a replacement neck in this case, but the customer is desperate to keep this neck as it holds some sentimental value to him. He's aware the repair will not be invisible, how…

Hello, Help needed please! 🙏 It’s a Washburn g10v that I am trying to source parts for. The owner wants to do a full restore but we can’t move forward with the job as the trem is missing the micro tuner thumb nuts. The trem is a big old rare thing with 2001 on the edge of it. Please see picture for reference. (Taken from reditt, a common problem it looks like) I have one of the thumb nuts here and I think it’s a #no.5 -44 UNF thread. But it’s…

https://forums.autodesk.com/t5/fusion-design-validate-document/need-lofting-advice-or-is-there-a-better-way-for-this/m-p/13219436

Hi everyone. I have begun to incorporate more rattle can toner work in my touch up and cosmetic repairs. I have been using Mohawk toners so far and I am now trying out a different one of their toner products that is new to me. I use Mohawk Ultra Flo Ultra Bond for my clear coats. I thought it might be helpful to have a dedicated thread to the topic of rattle can toner as it pertains to touch up. Particularly headstock breaks that incorp…

I drew up and printed these F hole plugs for a customer a little while back, felt like showing them off here. The bottom diamond shaped piece has a M4 nut in it, and is super glued to the body of the plug at its two tips. An M4 screw threads into the nut through the counter-sunk hole in the top of the plug. The entire plug drops into the F hole, and then you can tighten the screw slightly to expand the plug so it clamps itself into plac…

I have decided to implement a fee for time spent researching and sourcing parts or project management beyond the 30 minutes I currently offer at no additional cost. Anyone else doing this? I'll report back my results for anyone who wants to subscribe to this thread.