The Hub

Good morning everyone, I was taking some measurement on production necks with scarf-joint (13° headstock angle) to add some machining process with the cnc. I so recreated the standard neck blank feature (100mm wide and 20mm thick), then drawed the 13° angle. Everything correspond the to the real piace but two measurement: the startingcut behind the break angle is ''off'' by 20mm +/- as well as the cut on the bottom, still off by 20mm…

Greetings fellow Looths! I recently received a request from a customer to replicate Kurt Cobains 59 Martin, starting with a Sigma DM3. I have pasted the customers email to me below. While I have been a looth hobbyist for many years, I just recently opened my official business, Finger Lakes Guitar Works, and am just getting off the ground and a good flow of repair work is already coming in. While I feel 100% confident in my abilities to…

Just wondering, anyone doing Ken Parker finishing on an acoustic with the bridge glued on? I've been using the finish for a while but I'd like to start glueing the bridge on before I finish so I can acoustic test everything in its final state. I can't see a reason why I couldn't wipe the epoxy and oil up into the bridge joint and then remove it by rubbing but I was wondering if anyone has done it already. It would mean finishing the…

In Michael Baskin's on-line video, he uses a frequency test of a guitar in the white to determine whether to thin the lower bout before finishing. The guitar in the video has a bridge attached. I'm wondering if this is the final bridge or something temporary. If the latter, how do the results compare to the final frequency analysis? I've used a bolt-on bridge to do the same, but don't have enough data points to draw a firm conclusion…

For my current mandolin build, I set out to answer 2 questions: 1. Whether to use physical deflection or frequency analysis to measure stiffness, and 2. How well can I measure wood quality in rough sawn form? (T. Gore says it needs to be planed smooth and rectangular for frequency analysis.) I have 4 different topwood species available for my current build: California Sitka, Englemann, Lutz, and Coastal Redwood. The billets range from 37…

Hello All! My first post and I'm very happy to be here and share the highs and lows of this pony ride. After years of bending sides on a hot pipe or bending machines belonging to 'other people', I finally built myself a bending machine. Functionally it is great, but the result on some test material was far from great. See pictures attached. What you see here is a doug fir 'test side' that certainly came out guitar shaped, but oh my, what…