The Hub

I've built a number of classical guitars with an adjustable neck and they seem to gather quite a bit of interest, so i'm currently in the process of looking to refine the design and build. It's quite a simple construction where the neck is held together by string tension and hangs on a pivot. I developed a 3d printed "socket" which acts as the interface between the body and the guitar and allows for some fine tuning of the alignment of t…

Good evening folks, lately I'm experiencing some sanding methods/mechanism frustration. Can't explain better than look like I'm regressing at doing it. The only thing changed in my building routine is that I'm currently using a CNC (I haven't used one for some years) for both bodies and necks. I have no problems with necks, but sanding bodies has become incredibly frustrating, specially around the edges. While I keep improving my c…

Hi everyone, I'm Martino from Hub of Acoustics, a collaborative project created by luthiers for luthiers. Our goal is to explore and teach acoustic principles that are directly relevant to instrument making. In 2026, we’ll be running four courses in different parts of the world, all focused on giving luthiers practical tools to better understand and control the acoustics of their instruments. We’re excited to introduce our very…

I'm fast approaching the finish coating of 2 acousitcs. The sitka spruce tops are really bright. I'd like to tone them down a little and have been scouring the web for methods. Seems like adding amber toner in either the sand sealer or more likely the first set of nitro lacquer coats might be the the ticket. I see Stewmac has a Colortone stain called "Vintage Amber" that can be mixed into the nitro. Anybody have expirience with this pro…

I cut the fret slots for a baritone guitar build today, so I thought I'd share my method for cutting fret slots, as I think it is a bit unusual. I radius and profile my fretboard before I cut the slots. I print out a paper layout of the fretboard, double-stick tape it to the radiused and profiled fretboard, line up the saw by eye to using red hatch marks on the printout, and saw the fret slots with a 3" circular saw that rides on…