The Hub

I'm nearing the end of my first build. I have about 1 mm gap above the top at the end of the fingerboard extension. I've read and seen some guidance to clamp that down while gluing the extension. Others seem to build in a wedge-shaped shim - although it seems that is mostly done with neck resets and not new builds. A straight edge on the frets is just slightly above the top of the bridge so I think my neck angle is good. What are your t…

Hi Everyone, I’m working through building my first set neck electric, an LP Jr. I had some build questions… - if you’ve built these Gibson style set necks before, did you cut the neck pocket straight and angle the heel of the neck? Or did you cut the pocket at the angle and keep the bottom of the heel straight? I’m attempting to cut the pocket at an angle, and it isn’t the easiest thing to do, I’m finding out. First, I’ve had some moveme…

Finishing up a new cutaway acoustic. I thought I had it right before finishing, but now that the finish is done and the neck is bolted on, a straight edge on the frets is 3/32" over the top of the bridge. Can I work with that, or do I need to either add a shim under the bridge, or just cut a new bridge? Any advice would be greatly appreciated... Paul in Chicago