The Hub

After several years of fighting with my bandsaw blade jumping off every few inches of cut (it needs a new bearing on the top wheel), I decided to try something bass-ackwards. I put the blade on with the teeth facing the 'wrong' direction. Not only did that solve the problem of the blade jumping off, but it has made the cutting of pickguard material much smoother. Has anyone else experienced this kind of situation? Do you have any other…

Question about splines: At what point are they necessary? My question is primarily regarding the crack to the left between the bridge and the sound hole as well as the crack at the upper bout that runs along the fingerboard extension. I have already glued them both and used the TJ cleats that run the full length of the cracks. I have already splined the lower bout crack that runs from the bridge to the binding as it was super gappy and d…

I am working on a neck reset on a Washburn Parlor - SN 283552. I have read that the 28 in the SN indicates that is was built in 1928, but the owner thinks based on her research that it was built before 1920. I am assuming a dovetail joint and that I can get into the neck joint for steaming by drilling into the 13th fret slot, but if anyone knows differently please let me know. The fingerboard extension has already separated slightly…

Hi all, new to nut slot work world, please can you help me with this mystery? fret levelling, neck relief and string action adjustment all completed to Fender 9.5" radius spec. very happy with that. the next step: 0.011” High E string’s nut slot was a bit low. I used Dave Johnson’s (MI Guitar Craft Academy) “q-tip slot raising method”: the pulled cotton strand, plus extra thin CA glue, to fill the slot, then trim it off once dry,…

Hi to everyone does anybody knows about products related to the setup. I mean cleaning products that you can use instead of only use the Maguires products or any other products related to the cleaning process. For example I usually use the yellow shampoo from maguires and also the Triplex Carnaubba Wax from the chemical guys. Any clues ?

Hey all, Anyone have any go-to methods for making new replacement bridges look old? I’m about to make a new bridge for a relatively beat up 40’s Martin and contemplating ways to make it look more the part. With the replacements I’ve made up to this point I’ve always just sanded em real smooth, micromesh, oil, wax etc. I’m thinking maybe a wire brush prior to sanding for that shrunken grain look? The new bridge will be Indian rosewood. T…

Need some guidance for binding repairs. I'm using the "Martin method" using CA glue and tape for re-attaching the binding. From there: Scrape glue 400 grit to level Brushing on Lacquer 400 grit to level Meguiars #1 Meguiars #3 Meguiars #7 All by hand. But I recently purchased a Proxxon hand polisher. I'm still getting big marks. Its usually "ok", but I'm noticing huge swirls. Not pro. I do not have the money/space for…