The Hub

Good evening folks, lately I'm experiencing some sanding methods/mechanism frustration. Can't explain better than look like I'm regressing at doing it. The only thing changed in my building routine is that I'm currently using a CNC (I haven't used one for some years) for both bodies and necks. I have no problems with necks, but sanding bodies has become incredibly frustrating, specially around the edges. While I keep improving my c…

Here You'll seehere pin tip sized bubbles. Nitro finish. It got hot in a case. They'll need a light amagolmater mixture applied to melt'm back into the surface. Im looking for advice on the recipe for said amagolmater....Straight retarder? Im not sure if Id need lacquer in the mix that I apply....Thank you! Colin O'Brien LittleCreek Instrument Repair, Nashville. Images

Hey guys, does anybody know of a good alternative to mixol? I use it in lacquer for mixing opaque colors and it's great but I've been on the lookout for something more affordable and haven't had much luck. Wondering if anybody here knows of anything. Thanks!

I am working on an article to post here on the Looth Group regarding the history, and problems, with scale temperament. In the process, I asked Claude about a particular point, and Claude gave me a quote that perfectly encapsulated the concept I was exploring. I asked Claude to provide the specific citation for the quote. Claude fessed up to outright misrepresentation. Probably nothing new here, but I thought it was worth sharing.…

Hello — I would like to finish a mahogany electric neck and body with wipe on poly (probably Minwax satin) and would like to pore fill with Z-Poxy. I can’t find a definitive word on their compatibility. - Can I just wipe on the poly coats after block sanding the 2-3 Z-Poxy coats? - Should the Z-Poxy be sanded all the way back to wood or just smoothed/flattened? - Is a coat of unwaxed shellac between the Z-Poxy and the wipe in…

Greetings fellow Looths! I recently received a request from a customer to replicate Kurt Cobains 59 Martin, starting with a Sigma DM3. I have pasted the customers email to me below. While I have been a looth hobbyist for many years, I just recently opened my official business, Finger Lakes Guitar Works, and am just getting off the ground and a good flow of repair work is already coming in. While I feel 100% confident in my abilities to…

Is anyone using the LuthierTool Neck Angle Jig. I have a quick question about setting up to cut the tenon and getting the correct angle dialed in for cutting the heel block. TIA for any help

Greetings and thanks in advance for your help. I live in one of the most inhospitable places in the world for wood storage (Mojave Desert CA) and later this year will be moving to another more inhospitable place (Sonoran Desert, Buckeye AZ). The realative humidity is currently 16% and that will drop when summer comes. I'm attempting to collect and store wood for future builds and today I spent some time wrapping all of it in seran…

The Artisan Guitar Show this weekend gave me a kick in the behind to get back to more promoting of the builds I'm doing. Here's my first try doing multiply binding, and it turned out pretty well

I’m a pretty recent guitar maker. When I retired in 2019, I had to keep very busy and making guitars was my answer. As time rolled on I became more and more involved (ie; anal). As I age , I realize I keep making little errors. I forget a step or don’t use the right procedure. My son, an MD, told me to do what pilots do. That is a check list in chronological order. It’s worked wonders. I think I’ve cut my error rate in half!

Hi everyone, I'm Martino from Hub of Acoustics, a collaborative project created by luthiers for luthiers. Our goal is to explore and teach acoustic principles that are directly relevant to instrument making. In 2026, we’ll be running four courses in different parts of the world, all focused on giving luthiers practical tools to better understand and control the acoustics of their instruments. We’re excited to introduce our very…

I have a set of bubinga for an acoustic back, but one piece had a slight cup that made it difficult to work with for joining together. This is pre-thicknessed, with the piece at 4.5 mm thick. I tried wetting and heating it, as I do for sides, and pressed it flat during the process. I heated it to 300 degrees F, and then let it cool while pressed, and the cup got substantially worse. I then pressed it into a reverse cup using a radius…

So after a small battle with an illness, I started building again just today! The first (old) own design since 2020. It seem like I'm breathing again! Images

Hi Everyone, I believe this may be my first post here, so just a quick introduction — I’m Andrew in Milwaukee, WI. I’ve been building a few years. My luthier eyes were opened first by Charles Fox in Portland which led me to the Gallop School. I recently retired from a tech career and I am now based in Milwaukee, WI focusing on acoustic builds. I’m currently exploring wood-body resonator guitars, and I’d love to learn more from t…

Greetings, I'm doing some research on suppliers for Brazilian Rosewood. I see there is more available than I imagined but pricing is all over the board. I came across a group named HanoverBrazil Marketing and Trade. Looks like they import product from Brazil legally apparently from stumps which are CITES certified. Anyone have expirience with them? Or, any recomendations for a reputable vendor for Brazilian Rosewood "000" or larger…

Greetings, I was wondering if anyone has expierence with good a supplier for red spruce, preferably old growth, that they would point me to. This would be for acoustic tops/sound boards. From the reading I've done, it seems that the "Adirondack" variety might be the prized piece to get. Haven't decided if torrified is what I'm looking for. I'm also going to need to get brace wood of the same species. Any and all suggestions are…

Hi all. Brand new member. I’ve been building a classical guitar via kit from LMI for a couple of years now. I keep putting it off but recently became motivated to get back to it. Unfortunately LMI is out of business so I now have no one to go to to ask questions. I’m at the stage where I’m putting the sides together in the form. I followed the dimensions for the form based on the plans as I measured them, but the sides overlap pretty ba…

I did a pretty big update to my web tools last week. These are updated from the older versions I had up on celestialinstruments.com. There’s an updated FFT tool now, plus mode detection for guitars and plates, wolf note detection, played-note energy transfer, monopole mobility, plate thickness calculation, and 1/2/3/4 DOF modeling that can be prefilled from FFT data. The part I’m most excited about is being able to fit a measured guitar re…