The Hub

Hi friends, I just stumbled upon a 1966 P-Bass, nearly completely original. The owner bought it in 1971 and it had already been stripped of its original finish. That was a thing back then. You can guess that 55 years of gigging had the wood absorb much of the owner’s DNA and sweat. Maybe a few beers as well. Surface was quite tacky as you can expect. I cleaned it with naphta and StewMac’c brand-new cleaner (quite a great product I'd say…

Hi, thanks for this great resource. This is my first post here. I work on my own instruments and have little experience with advanced repairs. Recently I acquired a ca. 78 Sigma DR28H. I bought it because it sounded great and came with a pickup installed. I wanted something for open mics and gigging. With light strumming it sounded fine but I found some buzzing when I took it to a jam. I made a nut and saddle , adjusted the truss…

Hello estimable friends, A very long-term friend of mine left us on Christmas Eve after a long illness. His sister tasked me with evaluating, restoring, and selling his stuff. Today I'm preparing to restore a 2008 Longhorn GOM to its original EMGs. Pulling out the humbuckers I see a Pearly Gates and… what looks like an original short-magnet PAF. Correct shape brass screws for the bobbins, UV light confirms sticker and tape, tooling mark…

Does anyone have experience and advice for touching up the color of a Les Paul Goldtop? It looks to be a light sparkle. Not looking to finish the entire top. Thanks!

I was asked to turn this Fender American Natural Strat into a hard-tail. It would have taken a good while to finish this plug without LED Coatings. I used SM Colortone H2O base grain filler colored with MIxol Ochre; sanded it flat an hour later, then put on a finish with LED Clear Gloss colored with Colortone Stains (Straw, Light Yellow, and a touch of Med. Brown). The entire finish took 25 minutes. THen I glued it in with Epoxy colored…

I had a very unique instrument come into the shop yesterday. It's an American built Weissonborn/lap guitar (*spelling). The top has separated from the kerfing and sides on the lower left bout, and was raised significantly while under string tension when the customer dropped it off. I have a two fold problem as I see it. Applying horizonal pressure to a very light and fragile instrument, and getting enough glue into the separation where…

I had a client dropped off his Suhr JM Classic for a pot replacement yesterday. The fretboard extension hangs over the pickguard on these a little so I flipped it over to loosen the neck screws a tad. I found what looked like 3 missing neck screws and only one screwed in place. The one screwed in place was bright and shiny. I removed that screw and the neck would not budge at all. I focused a pin light into the neck pocket holes to find…

Can anyone shed light on the “high clarity” options that Bjorn offers? I’m looking for an all around glue for most applications, just wondering if there is benefit to the HC options?

I’m working on a 1920’s Regal with an ebonized fingerboard. I’ve seen these referred to as “ebonized pearwood,” but all I know is it’s worn through to a light wood, definitely much softer and grainier than maple. I want to keep the finger wear through the ebonizing, but build up a little layer of protection. Boiled linseed oil seems ideal for this. However, I’ve heard boiled linseed oil doesn’t react well with tannins. Tannins may be pa…

Hey all. I've got the above-mentioned guitar on my bench. It had a neck reset and what appears to be a new bridge pad put in 14 years ago. It's a crack-free guitar except for a couple of little hairlines running from the back of the bridge to the upper tone bar. I thought that was a bit weird. Inside, everything looks okay until I turn off the inspection light, at which point I can see the rosy glow of daylight through the top - this…

Today I have spent the better part of five hours attempting to get the fingerboard extension free on this guitar. I am using the method I have used for dozens of neck resets: 100 watt halogen bulb with heat shields. After a couple hours I thought I was making some progress under one corner, only to discover after some movement that my palette knife was going through the top. I then abandoned that area and have been applying heat and…