The Hub

Hi All, I wanted to check in with folks in the industry and ask for some advice. I have been on a building Hiatus for a number of years now (Hand Injury, Medical Issues). Things have gotten much better, and I am fully able and capable of building once again. The 2nd biggest hurdle I have had was a lack of opportunity for shop spaces to build. I now have a viable workspace and full use of my hands once again to build. The problem is that, o…

Let me start with this; I'm trying to find the root cause of difficult fret wire installation of two different SM fret wires. I've spent a lot of time gathering dimensions and experimenting with techniques wich could cause the problem. I enlisted the help of a colleague who arrived at a similar poor performance. His solution was to glue the fret ends/ beat the frets in. My "rather" is to find the root cause so I don't have to go thr…

Hey all. I apologize if this type of post isn't allowed here but wanted to share anyway. I've been building a tool called Looth specifically for luthiers and repair techs, and I'm looking for a small group of interested looths to help shape it a bit more before it goes public. I got tired of managing spreadsheets and decided that it could be simpler and more automated. The core idea is simple: one place to track every build…

I’m a pretty recent guitar maker. When I retired in 2019, I had to keep very busy and making guitars was my answer. As time rolled on I became more and more involved (ie; anal). As I age , I realize I keep making little errors. I forget a step or don’t use the right procedure. My son, an MD, told me to do what pilots do. That is a check list in chronological order. It’s worked wonders. I think I’ve cut my error rate in half!

https://www.instagram.com/reel/DWAuW40jAR_/?igsh=MW1jNDdoYzllMGFmMA== I’ve spent a few overly caffeinated days bouncing between modelling environments, different combinations of operations, tools.. subtle differences in how the coffee is brewed. In short… • Building Iso Curves in Sketch. Defining the surface structure and flow • NURBS Surfacing from curves, smooth intentional surface topology. • BRep Face to T-Spline in Form Environment. Org…

Hello! This is my current build! https://www.instagram.com/p/DMO6PqXRAkg/?utm_source=ig_web_copy_link&igsh=MWdhbW4wdG51bDJ4ZQ== "Here’s a quick check-in on the two guitars I’m currently working on. The bodies are getting ready for binding(arm bevel too!), while the neck is in the middle of headstock design. For the tiger-patterned guitar, I’m planning to inlay Jakho-do (Korean tiger-and-magpie painting) with mother-of-pearl. The other one…

Dear looth community/colleagues around the world, During 2023/24 I have developed a digital gauge to measure so-called longitudinal twist of (bass) guitar necks: the LTwist® gauge. Just to be clear, this is about the "cork screw" type of deviation along the length of a neck, not the bow of a neck. I think there is no need to explain how a too severe neck twist can make it difficult or even impossible to set up a stringed instrument (guita…

[ The majority of my learning has come from the Blues Creek Guitars YouTube videos and reading books (i.e. no mentor/formal training). ] When I checked the centerline (picture with ruler is pre-adjustment), I was slightly off the perpendicular. So I removed a tiny amount from the cheek (side with the purple tape), getting that nice and flush and centerline where I want it. But now I have a .035" gap on the other side. What should I check…