The Hub

Here You'll seehere pin tip sized bubbles. Nitro finish. It got hot in a case. They'll need a light amagolmater mixture applied to melt'm back into the surface. Im looking for advice on the recipe for said amagolmater....Straight retarder? Im not sure if Id need lacquer in the mix that I apply....Thank you! Colin O'Brien LittleCreek Instrument Repair, Nashville. Images

Hey guys, does anybody know of a good alternative to mixol? I use it in lacquer for mixing opaque colors and it's great but I've been on the lookout for something more affordable and haven't had much luck. Wondering if anybody here knows of anything. Thanks!

I'm fast approaching the finish coating of 2 acousitcs. The sitka spruce tops are really bright. I'd like to tone them down a little and have been scouring the web for methods. Seems like adding amber toner in either the sand sealer or more likely the first set of nitro lacquer coats might be the the ticket. I see Stewmac has a Colortone stain called "Vintage Amber" that can be mixed into the nitro. Anybody have expirience with this pro…

Hey everyone. I'm wondering if anyone has a good recommendation for a water based finish that buffs nicely. I currently use lacquer but I'd rather use something less toxic. One finish that's come up in my research is General Finishes Enduro line. Has anybody used that before?

Just joined the group and have only built 3 guitars so far but just ran into trouble on my latest project. Long story short: I built a '57 LP Jr that came out fantastic but the neck was set incorrectly and was nearly unplayable. I cut off the body and made a new one and applied the burst and a few coats of clear before gluing in the salvaged neck. To finish up the neck joint with a bit more black, I dusted off my 20 yo Paasche airbru…

I am switching from NC lacquer to EM6000. I also want to switch from black WB filler to blackened epoxy grain fill. My question relates to keeping the color in the pores and off the surface wood, and whether to vinyl seal before and/or after epoxy fill, I already know how to tint epoxy black. Could black grain fill style be accomplished with black epoxy as the grain filler and would a vinyl sealer be used at all, or just use EM6000 for…

Just curious on some thoughts if this fan would work to prevent me from poisoning myself and my family from spraying in my basement shop: https://a.co/d/8UPeRwk I have a basement shop with a door that goes outside. I don’t have a sprayer system, so am currently using rattle cans. Wondering if I set this up with a big 25 foot hose going outside, and put my workpiece right in front of it, if I could get away with spraying in my shop to acc…

Hi Everyone. I am planning to finish my latest electric build which has a Zircote top. I am going to spray Nitro Lacquer. Is there anything I need to watch out for in spraying over such an oily wood? Thanks!

As seen in the picture. I gotta get this build done in one week and realized I didn’t have black plastic side dots so I whipped some up out of ebony dowel stock. For some reason a yellow stain comes out after I spray with lacquer. I sanded back one time already and respirated but here we are once again. What’s going on here?