The Hub

https://www.instagram.com/reel/DWAuW40jAR_/?igsh=MW1jNDdoYzllMGFmMA== I’ve spent a few overly caffeinated days bouncing between modelling environments, different combinations of operations, tools.. subtle differences in how the coffee is brewed. In short… • Building Iso Curves in Sketch. Defining the surface structure and flow • NURBS Surfacing from curves, smooth intentional surface topology. • BRep Face to T-Spline in Form Environment. Org…

I just updated Fusion 360 and there are some significant changes in workflows. I kept looking for New Component and couldn’t find it anywhere. Frustrating! It is still available in the Hybrid workflow. The new workflow is split into individual Parts and Assembly’s made of those Parts. This YouTube video explains the changes very well.

Hello! First time poster, long time lurker... I thought you guys might get a kick out of this. I got fed up of having to re-mount my workbench lid after pulling it off a particularly bumpy/cold/hot/anything truck ride and began searching for a mounting system that would hold everything up when the lid was open, but also crucially not fall off when it was closed after the show. I happened upon multiboard, which looked like it could do the…

I've seen the Elevate Luthierie jig, and it seems simple enough. One thing I don't like about their explanation video is the handwaving around "set the joint length where you want it"...feels like even with the jig, you have to do too much measuring to make it fit exactly (or within the tolerance you want) Given I can model well enough in Fusion and have a 3D printer, feels like a challenge to take on! As far as I can see, the jig is just…

This is a repost from the main feed so it is in the correct forum. The recent F5 CAD modeling video inspired me to take a stab at it. I use Fusion 360 and have already completed a full A5 model that I’m using to prepare a lot of parts for my CNC. The F5 top seems intimidating. I focused on modeling the scroll alone for now. I didn’t pay attention to following a plan, or having perfect dimensions, or getting the curves to look perfect th…

tl;dw - switch to Outer Walls first, then inner walls. In orca/bambu studio, the video says to do inner/outer/inner. It also mentions the travel distance threshold in Retraction settings - setting it to 1 or 2mm; I didn't quite understand what that accomplishes.

I have access to a nova thunderlaser 5-something and I saw a video of somebody cutting out a fret board as well as the fret slots, as well as an entire neck out of a blank with a laser cutter, and I’m wondering if this is a reasonable thing to do and if anybody has experience with the kind of shrinkage that would probably happen with such a deep cut in the neck blank. Any insight at all is greatly appreciated. Thank you!

https://youtu.be/hwuFgq64mT4?si=NHJmgg12q2EL-D41&t=23 I was checking out this video from Warmoth and that fancy glue shooter caught my eye. After some brief amazon sleuthing I found something similar for surprisingly not as much as I thought it would cost. https://www.amazon.com/dp/B098R7ZWP9/?coliid=I2RE7GKODJQXD4&colid=14B0Z9NCO74LW&ref_=list_c_wl_lv_ov_lig_dp_it&th=1 Looks like the above link is entry level with some fancier units in t…

So stumbled on this video. Seems cool, I have large hands and am always cussing when using anything I have. I like the idea of pumping to apply pressure outside of the guitar. Curious if anyone used one previously?

This is a rehash of the amazing Loothprint that Mike (@member@member@member) shared to the group (Surface Inspection Light – The Looth Group). I don't have a 3D printer so had to take a low(er) tech approach. The pics should be self explanatory. I have linked to a DXF and CRV (Vectric VCarve) file in case it helps. I do most simple tooling in Aspire as I can move more quickly there than in Fusion. Components needed: .75" Baltic birch ply Flash…

What holders/jigs/vise devices have you built to hold an acoustic guitar body upright? I saw Michael Bashkin using something like this in his neck reset video. I’d like a way to clamp the guitar to the side of the bench while I work on the neck.

Not exactly 3D Printing but it’s the closest sub-category. After backing an Indiegogo project back in August, my Seal Lite finally arrived! My first impression is that this thing is pretty freaking cool. I tested it out after skimming the tutorial (because that’s the true test of interface ) and received halfway decent results. I put maybe 20-25 minutes of use on it this evening, and I’m excited to give it a more proper dive over the wee…