Hey everyone, I had a question on how to approach this bridge reglue. It's from a 1940's Kay type guitar, I removed the bridge without issue, and did some surfacing of the underside of it, but there's a problem. The bridge is missing material on the outer edges and I don't think I can remove much more material without compromising the overall shape and structure of it. I was wondering if you had suggestions on how to approach this? I wa…
P3 replies
3 replies
LikeShare
PPrivate member
Unfortunately it's an absence of material on the bass and treble sides. @member
Hi all, I'd like to get some input on how to address this top blowout. For starters I own this, I got it as a project guitar, 71 D28. I'm not as experienced with acoustics as electrics and this is a big project but I got it to learn new skills and I'm confident I can do it with guidance. It had been stored in the case for many years under tension and was way too humidified. The bridge had pulled up I assume in stages. The center seam se…
Chris, can I add this for the council of elders show ? Also, we are going to have @member on pretty soon to talk about a job about this dramastic. Here's a link to the live show co…
I don’t have CNC capabilities so I could not duplicate Dave Slimmer’s version ( https://loothgroup.com/loothprint/bridge-clamping-cauls/). Got a 12x18x1/2 inch HDPE cutting board on Amazon for under $10 (https://www.amazon.com/dp/B001D3LQVA), drilled a row of 1/2 holes about 5/16” deep with a Forstner, cut the HDPE into 5 sided chunks so I could orient by touch, and free handed the brace grooves on the band saw. The clamp swivel pads are 1…
At what point do you tell a customer that their acoustic instrument needs a bridge reglue? Do you do it when the corners are just barely starting to lift? Once it has begun to affect playability/tuning stability? Do you offer half-measures to save them money when the damage is not too bad (dripping in some thinned tite bond instead of removing the bridge entirely for example)? I ask this because a Godin acoustic bass just came across my…
You've had better luck than me with half measures. I'm not sure why you're diluted Titebond worked, but the one of the unfortunate things about Titebond, is that you cant glue TB to TB. It could be th…
I've owned this Jersey City made 12-string/drone 'harp' guitar for a few years and want to get on the repair. I've taken the necks off many dozens of Schmidt-made guitars but never one with two necks. I've searched the web looking for harp guitar neck removal and didn't find anything of use. Asking for any tips/aids/experience from the loothers. My plan is to make a custom neck removal jig that fits the necks, and then drill the typical…
Beautiful guitar. Will your neck jig(s) bind the two necks together top and bottom, as well as push up equally on the heels while you release the joints? Seems like any loss of rigid coupling between…
Dave Slimmer OldSchoolGuitarLoothprintTools, Spaces, Robots, and WidgetsLite
Thought fellow looths might enjoy this geekery. I've often wished for custom size heating blankets, but didn't even try uploading the file to get a quote from some of the major manufacturers. I was looking to spend countless hours of my life on something and save a hundred bucks. So I did some research, a little bit of head scratching, a slight bit of math reckoning, and made this '70s Martin bridge plate remover. Pretty slick, nice…
3 replies
