The Hub

Hi all. I've just joined the group....I'm pretty certain what I'm asking here has already been covered somewhere but not really sure at the moment how to search chat topics. If so, and it's easier to just point me to an older chat...please do so! I'm in my 50s, been playing guitar for as long as I can remember. I'm a trained wood-worker (amongst other things) and am looking to start a new journey into guitar repairs. At my age I can't a…

Hello again folks, how is everyone! So I'm curious about what people here think about re-tops, who's done them, and what sorta ballpark rates you've charged for past completed jobs. I've got a bit of a wild one here, so strap in if you've got a couple minutes for story time! Back in 2012, I traded an HD28V of mine for a cool 1966 D-35 that needed some work. Basically, the body and neck of the guitar were fine apart from…

I’m a pretty recent guitar maker. When I retired in 2019, I had to keep very busy and making guitars was my answer. As time rolled on I became more and more involved (ie; anal). As I age , I realize I keep making little errors. I forget a step or don’t use the right procedure. My son, an MD, told me to do what pilots do. That is a check list in chronological order. It’s worked wonders. I think I’ve cut my error rate in half!

I had a vintage Gretsch semi hollow come through the shop this week and it's left me with some questions. First off identifying the instrument's model has been a trick so far. The only information I can find is that is was likely built in and around the early 50's Second, it's in need of a neck reset. I'm not particularly well versed in resets for hollow and semi hollow guitars, especially one of this age and design. I'm very curious…

Hey all, Anyone have any go-to methods for making new replacement bridges look old? I’m about to make a new bridge for a relatively beat up 40’s Martin and contemplating ways to make it look more the part. With the replacements I’ve made up to this point I’ve always just sanded em real smooth, micromesh, oil, wax etc. I’m thinking maybe a wire brush prior to sanding for that shrunken grain look? The new bridge will be Indian rosewood. T…

I'm fast approaching the finish coating of 2 acousitcs. The sitka spruce tops are really bright. I'd like to tone them down a little and have been scouring the web for methods. Seems like adding amber toner in either the sand sealer or more likely the first set of nitro lacquer coats might be the the ticket. I see Stewmac has a Colortone stain called "Vintage Amber" that can be mixed into the nitro. Anybody have expirience with this pro…

Hello, One of my commissions is coming down the pike and it's going to be my first time using bar frets. I could use a once over for any helpful tips if you have any. About the guitar: Aged HD-28 but mahogany back and sides. I think Martin called this a HD-28 M? Skipping the truss-rod and using two carbon fiber strips. My process for Frets: 1: I CNC my fingerboards to a 16" radius and for T-frets I use a .023" to cut slots with a mat…

Hey yall! I am thinking through multiple options for preserving a large signature for a customer that is on the Front of a white Strat. I have done this a few ways before but never got to see much how they aged. What’s the general consensus for doing this sort of job? Thanks in advance!