The Hub

Good morning everyone, I was taking some measurement on production necks with scarf-joint (13° headstock angle) to add some machining process with the cnc. I so recreated the standard neck blank feature (100mm wide and 20mm thick), then drawed the 13° angle. Everything correspond the to the real piace but two measurement: the startingcut behind the break angle is ''off'' by 20mm +/- as well as the cut on the bottom, still off by 20mm…

Good evening folks, lately I'm experiencing some sanding methods/mechanism frustration. Can't explain better than look like I'm regressing at doing it. The only thing changed in my building routine is that I'm currently using a CNC (I haven't used one for some years) for both bodies and necks. I have no problems with necks, but sanding bodies has become incredibly frustrating, specially around the edges. While I keep improving my c…

Hi all. I'm in the process of working with a landlord to customize a space for my growing repair and building business. The space is approximately 800 square feet and broken into a major space (around 400 square feet), and 2nd large space (around 300 square feet) that I'm thinking of as a machine/sawdust room, and 2 smaller areas that I'm considering as a spray booth and a wood/guitar storage closet. I'd love to hear about lessons learn…

Hello, One of my commissions is coming down the pike and it's going to be my first time using bar frets. I could use a once over for any helpful tips if you have any. About the guitar: Aged HD-28 but mahogany back and sides. I think Martin called this a HD-28 M? Skipping the truss-rod and using two carbon fiber strips. My process for Frets: 1: I CNC my fingerboards to a 16" radius and for T-frets I use a .023" to cut slots with a mat…

Hey everyone, I had a question on guitar building and overcoming something of a mental hurdle that I have. Quite awhile back I had access to a CNC machine and routed some Stratocaster bodies which you can see in the pictures. I was mostly pleased with how these turned out, but there are a couple of issues. On the cherry bodied guitar, the seam is off center and I had some blowout at the upper horn location, which caused me to try and cu…