The Hub

So the first real "full build" I'm doing is a Stewmac 000 kit. I was wondering about the back brace shape. I'll was planning to taper the ends at the side joint to about 1.5mm. Should I do some scalloping of the braces? Suggestions and comments are welcomed and appreciated. Regards, Gerry Images

Good evening folks, lately I'm experiencing some sanding methods/mechanism frustration. Can't explain better than look like I'm regressing at doing it. The only thing changed in my building routine is that I'm currently using a CNC (I haven't used one for some years) for both bodies and necks. I have no problems with necks, but sanding bodies has become incredibly frustrating, specially around the edges. While I keep improving my c…

Hi Folks Newbie here so please bear with me. I have a lovely early 90's Yamaha LD-10E acoustic in for repair, I think all solid wood? made in Indonesia and a lovely sounding instrument, however the electrics are letting it down. The pre-amp has a PCB populated with SMD electrolytic caps. Many of these have leaked and destroyed the PCB pads underneath. Repairing the traces is nigh on impossible so it looks like I'll have to replace t…

Hello again folks, how is everyone! So I'm curious about what people here think about re-tops, who's done them, and what sorta ballpark rates you've charged for past completed jobs. I've got a bit of a wild one here, so strap in if you've got a couple minutes for story time! Back in 2012, I traded an HD28V of mine for a cool 1966 D-35 that needed some work. Basically, the body and neck of the guitar were fine apart from…

Here's yet another acoustic guitar bridge tear off, this time the sound board came with and was damaged. The bridge is not damaged and can be cleaned up. But how would one go about repairing the sound board where the pegs? this is another skill building exercise - not a customers guitar. I included pictures of the bridge plate. If this has already been covered here, please provide a link. Thanks again very much to this great group…

Hey all. I apologize if this type of post isn't allowed here but wanted to share anyway. I've been building a tool called Looth specifically for luthiers and repair techs, and I'm looking for a small group of interested looths to help shape it a bit more before it goes public. I got tired of managing spreadsheets and decided that it could be simpler and more automated. The core idea is simple: one place to track every build…

Greetings fellow Looths! I recently received a request from a customer to replicate Kurt Cobains 59 Martin, starting with a Sigma DM3. I have pasted the customers email to me below. While I have been a looth hobbyist for many years, I just recently opened my official business, Finger Lakes Guitar Works, and am just getting off the ground and a good flow of repair work is already coming in. While I feel 100% confident in my abilities to…

Good morning to all - I have another skill building question - picked up another cheapo electric guitar to practice repairs on. I didn't see the big dent, but figured its an opportunity to practice another type of repair. big chunks of polyurethane finish are gone and the bit that's left has a hairline crack around the bottom. I'm thinking to use wood filler to fill in the missing chunks, and want to know if its best to remove the piec…

Guitar neck topology is worth going microscopic. 🔬🦠 After building my starting surface from a wireframe network in the sketch environment; a system of 4-degree control point spline rails, tangent to projected isoparametric curves along the shaft — I can convert the NURBS surface to a T-Spline and start cleaning up the artifacts left behind by the original loft. In this demo I’m turning on Box Display, which feels strange at first because…

Greetings and thanks in advance for your help. I live in one of the most inhospitable places in the world for wood storage (Mojave Desert CA) and later this year will be moving to another more inhospitable place (Sonoran Desert, Buckeye AZ). The realative humidity is currently 16% and that will drop when summer comes. I'm attempting to collect and store wood for future builds and today I spent some time wrapping all of it in seran…

I’ve been speed modelling parts with the printer running 24/7 since inception. There are currently somewhere around 75-100 individual pieces modelled in my source file. Mostly only building on what I’m considering the X axis, but it’s Freeform so I’ve used them to build out Y.. anyways… Connectors, Extenders, Couplers, Links, Sleeves, Feets, Plugs, Panels, Hooks… and on and on. In a moments time, I will have a mass drop folder of Standar…

The Artisan Guitar Show this weekend gave me a kick in the behind to get back to more promoting of the builds I'm doing. Here's my first try doing multiply binding, and it turned out pretty well

So after a small battle with an illness, I started building again just today! The first (old) own design since 2020. It seem like I'm breathing again! Images

Hello all, got a problem in a telecaster I rewired that has me in a twist. The basics: friend has a 2001 US Standard telecaster (left handed not that it matters). He bought it used and says it was quiet initially. A few years back he grabbed the pickups out of it and moved them to a new tele body with a torrefied maple neck he preferred. Recently he upgraded the new build with a Lollar CC tele set, and asked me to reinstall the original…