The Hub

Hi guys, here’s something I’ve been working on: a fully automated, programmable pickup winder. The software is still in alpha testing and there’s still a lot to design, but this is what it looks like so far! Images

Hello estimable friends, A very long-term friend of mine left us on Christmas Eve after a long illness. His sister tasked me with evaluating, restoring, and selling his stuff. Today I'm preparing to restore a 2008 Longhorn GOM to its original EMGs. Pulling out the humbuckers I see a Pearly Gates and… what looks like an original short-magnet PAF. Correct shape brass screws for the bobbins, UV light confirms sticker and tape, tooling mark…

I have an old epiphone archtop on my bench that I am struggling to get the neck off of. I think it's a 50's Zephyr (non cutaway, single NY pickup in neck position). Anyone have any experience with these? Is the neck not a dovetail joint? I'm no stranger to neck resets but this is putting up a fight as if it's been epoxied in place.

Hello all, A customer dropped a recent American Professional II Strat to have a Double-tap humbucker installed at the bridge. I rewired the guitar following Fender's schematic (see below) and installed a stacked 250 and 500k volume pot, treble bleed PCBs and push-push coil split/tap for this pickup. All went very well, until I tried it at switch position 2. Sure enough, the new unit does not play well with the others and combining delive…

So, like an idiot, I got well into the installation of an Anthem pickup system when I realized that the soundhole braces on this guitar are effing Lincoln Logs. They're easily a quarter inch thick (and feel like basswood). Because the Anthem preamp is designed to straddle the soundhole brace, I can't fit it as-is. Anybody got any experience with this? OPTIONS THE CLIENT WOULD NEVER GO FOR (and wouldn't thrill me either): 1. Replace the bra…

Hello! I have an Ovation CP-100 pickup. Its unsoldered and I can't seem to get the pickup to work again. There wasn't a spacer either. Which doesn't make sense because if the hot is soldered to the copper strip and the ground to the housing channel, it would just ground out. Any experience getting these back together? Said pickup: https://www.sweetwater.com/store/detail/CP100--ovation-cp-100-thinline-pickup-cream -Mike

I have a customer with a 2018 Gibson SG special with mini-humbuckers who is complaining about the pickups being too hot (distorting their amp too easily). I took resistance readings and, to my surprise, the readings are very high. The neck humbucker (see photo) reads over 16kohm and the bridge reads 23kohm. From the specs I've seen, mini-hums more typically come in around 6-7kohms. Has anyone seen this with Gibson mini-hbs that appear t…

Hello, I am building a bass VI for a customer. As with a Fender Bass VI he wants a control plate with 4 slide switches. 1 on/off switch for each of the 3 pickups, but with the 4the switch he wants to control the phase of the middle pickup. Any suggestions as how I should wire that? thanks!

We install a lot of LR Baggs pickups, but nobody has ever gotten more excited about their new pickup than Andy Wood. If you don't know Andy, watch this fun video.

Hey all, I have a client who wants a fishman soundhole pickup and a k&k mini wired to a volume pot on a Martin 000. Both pickups are pre-wired to their dedicated output jack, so I know some splicing has to be done. I wanted to reach out and see if anyone has any tips or tricks on how to make this smooth sailing?

Hi everyone, We’re really excited to be joining The Looth Group as new sponsors, and we wanted to take a moment to introduce ourselves. I’m Ben, and together with Paul McGill we run Go Acoustic Audio. Paul is in his 50th year of guitar making — a milestone that speaks to both his craftsmanship and his persistence in chasing better sound. He’s spent a lifetime building instruments for players at every level, listening closely to what works…

Would you have any recommendations on wiring configurations and piezo controllers to replace the electronics in my Music Man Reflex, which used to have the Game Changer system? The guitar has an HSH pickup configuration with a piezo bridge pickup. It has three existing holes for Volume/Tone/Blend, a blade switch slot, and a 3-way switch hole. When I bought this guitar about a decade ago, the Game Changer system offered a mind-numbingly a…