The Hub

I'll send you a sample or the file. let me know.

Hey looths, Thoughts on process on this here guitar. I have a D-35 that has… 1) a drastic bow in the neck 2) quite a shallow neck angle So diagnosis is, without an adjustable rod, I will need to compression fret this neck to get it back straight, and then proceed with a neck reset. I’m wondering how fellow looths would approach this. Pull the neck and do the refret, then adjust the angle. Or do the reftret, and get the neck relief where we…

Got my new printer a few weeks ago, and I have been loving life in 3D. I have made a bunch of cauls and tools in preparation for my next builds. On all the prints the first layers were a little fuzzy, so I did some research and adjusted the z offset. Got my first layers in the pocket. But that caused some horrible problems. Now I can’t even finish a print. First layer is fine. Second layer is hairy and fuzzy. Seems like the nozzle is dr…

I have a Hoffner bass with a neck that broke loose. The main problem seems to be that that neck was loosely fit and was relying on a thick layer of glue at the bottom of the neck pocket to hold it in place, it looks like some shimming is in order. My question is about getting the neck angle correct. With the bridge thumbscrews at the bottom of their adjustment, should a straight edge on the finger board touch the top of bridge, or the to…

I'm working on a Japanese Strat with a Kahler tremolo I've never seen before. I'm trying to find where the adjustment point for the saddle intonation is. The back side has openings for each string for... something. It's not an allen wrench, and it's not a screwdriver of any kind. The threads are 6/32" and when I tighten a screw into the holes, nothing happens. I haven't been able to find anything on google about this particular bridge.…

Acoustic Vibes Music is looking for a lead tech that would primarily be working on Martin and Taylor warranty issues. We are a Martin and Taylor Warranty Service center. So everything from Setups, to making new nuts/Saddles, minor finish repair, refrets, binding repairs, cleating cracks in tops, Pickup installation, strap button installation, pickguard removal and installation, bridge removals and reglue, level crown/polish, and oc…

Hello looths worldwide ! I once heard on the Loothalong Grace talking (figuratively) about for a list of all the things thay may cause rattle in a guitar, and after fighting with a setup lately I'm in for starting this list, from the headstock down : - Old strings : replace the strings. - Loose tuners : tighten the ferrules, tighten the screws (on the buttons / on the axis). - Nut : create a funnel for the strings to ease the path to the t…

So I've ended up with a 1961 Harmony H54 for free. The neck has about .022" of relief without strings on it. The fretboard was taken off long ago. I got it like that, it was just stuck on with double sided tape. I have no clue why it was taken off other than maybe someone wanted to fix the excessive relief and changed their mind. It looks like the original steel reinforcement rod was never actually glued in. It seems like it was bent a…