The Hub

Hello fellow Looths, I had a question in regards to a curious issue from a customers guitar. The guitar was brought to me in part because the customer was having an issue where the guitar was intermittent and would ground out. It's a partscaster with an HH pickup configuration, one volume, one tone, 5 way switch, and the tone control splits the humbuckers. The pickups are quick connect Dimarzio's. I took the pickguard off and noticed tha…

Ender 3 Pro for Sale. Lots of upgrades. CR Touch auto bed leveling, dual Z axis, Micro Swiss NG all metal hot end extruder combo. $175 local pickup.

I performed a fret replacement on a '70's Electra Les Paul, the notes on the G string at the 14th/15th fret have no clarity or sustain, same with the B string on the 13th fret. There is no interference from the frets themselves and is seems like a sympathetic vibration is cancelling out the notes. I have secured loose ground wires in the pickup cavity and put surgical tube in place of springs. I used fish glue to help secure the frets,…

Hi. I recently got a strat where the middle pickup cuts out intermittently. I cleaned and, using a multimeter, tested all the components. As far as I can tell the pickup itself has an internal break somewhere. After testing the components I wired the middle pickup directly to an output jack. Tapping the top of the pickup caused the output to toggle on and off. I also re-soldered the leads at the pickup eyelets but that didn't resolve the…

I have a Rickenbacker 620 on my bench; I have repaired the neck pickup (it came loose, uninstalled) and I am stumped with where the wire should dip into the control cavity. There is no hole in the route for the magnets, I assume it runs under the floating pickguard, but I dont see any relief or path under the main control panel. This has the toaster style pickups and dates to the 50's. Thanks in advance.

Someone in a Facebook group shared this site www.saturn-guitar-circuits.com and I wanted to pass along to this group. It's a non-comprehensive collection of the guitars coming out of post WWII Japan. The circuits are easy and nothing we haven't seen before. What's more interesting to me are the catalogued instruments. Being able to look at a pictorial guide and know the difference from something made in the Fujigen factory vs. Matsumoku…

Hey! Any tips about the best way to fix those 1966 mustang bass pickup screw holes? At some point someone used larger screws and now holes are too wide for the original screws. I was thinking about using some cardboard and CA glue to fill the holes and then drill new ones with a smaller bit

Hey folks, been really enjoying reading through so many loothing posts. I wind and rewind pickups day in day out and am a few weeks out from opening sundayhandwound.com to peddle my wares, making the big jump from “more than a hobby these days”!Reverb seller to LLC. I’d be happy to field any questions on winding and/or repairs.

So this one is a real doozy. Gorgeous Heritage hollowbody, destroyed in shipping. Owner got a full refund and they didn't want the guitar back, so he has no money in it currently. He's a collector and longtime friend/client/student of mine, which is the only reason I'm even considering it, he understands the potential nightmare this could be, and he builds very serious race cars for a living, so I can have in-depth and frank conversa…

Acoustic Vibes Music is looking for a lead tech that would primarily be working on Martin and Taylor warranty issues. We are a Martin and Taylor Warranty Service center. So everything from Setups, to making new nuts/Saddles, minor finish repair, refrets, binding repairs, cleating cracks in tops, Pickup installation, strap button installation, pickguard removal and installation, bridge removals and reglue, level crown/polish, and oc…

Hello looths worldwide ! I once heard on the Loothalong Grace talking (figuratively) about for a list of all the things thay may cause rattle in a guitar, and after fighting with a setup lately I'm in for starting this list, from the headstock down : - Old strings : replace the strings. - Loose tuners : tighten the ferrules, tighten the screws (on the buttons / on the axis). - Nut : create a funnel for the strings to ease the path to the t…