The Hub

Hello looths! Long time lurker, first time poster here all the way from New Zealand. I have recently acquired this 2008 Martin D-35 for a very cheap price ($1000 NZD - around 600 US!) it's dried out in a very cold environment and has two substantial cracks running all the way across the top, one large side crack, and a previous side crack repair that's been done quite poorly. I'm only about 3 years in to this repair journey and this is d…

Hey everybody, I should restore this Roger Rossmeissl Archtop. There is a lot of work to do. The owner is aware of the possibly-much-more-work-than-value situation. I am still thinking about how to aproach it, I want to start working on the guitar in August. It seems that there is not much warping in the top, few wood is lost. I do not know what happened to the guitar, but sometimes I hear a voice coming out the corner of my workshop mumb…

I've built a number of classical guitars with an adjustable neck and they seem to gather quite a bit of interest, so i'm currently in the process of looking to refine the design and build. It's quite a simple construction where the neck is held together by string tension and hangs on a pivot. I developed a 3d printed "socket" which acts as the interface between the body and the guitar and allows for some fine tuning of the alignment of t…

I've owned this Jersey City made 12-string/drone 'harp' guitar for a few years and want to get on the repair. I've taken the necks off many dozens of Schmidt-made guitars but never one with two necks. I've searched the web looking for harp guitar neck removal and didn't find anything of use. Asking for any tips/aids/experience from the loothers. My plan is to make a custom neck removal jig that fits the necks, and then drill the typical…

Anyone have plans/drawings for a vintage spec AJ they can share, or a link where I can buy them? I haven't been able to find anything other than J45 plans with general notes on the differences that aren't clear enough to follow. Thanks!

Hello! Im working on a repair for a cutsom build for a customer. Its a Dunable Yeti built in 2022. Anyway, all work was going fine till testing the rod... i discovered that the rod is working the opposite of how it should function on any other guitar. CCW is tightening (and no, no a dual action rod) Tightening this rod is adding relief. The guitar already had too much when disengaged. Trying to figure out how to approach this as this is a f…

Hi, I am still a little confused by the new look of the forum, hope this is the right place to ask. Which fretwire would you recommend for a refret of this 70s LP? The current frets are 2.75mm wide, but dressed down to 0,35mm height. I have heard storys about frets that are this low but never seen in real life before :-) (0.108" wide and 0.014" height). Thank you in advance :-)

Hello all! My name is Jake and I run a repair shop out of my NYC apartment. I am looking for someone who's experienced in CAD to help me with a project. I am working on a 5 string headless bass build for a customer. The neck & body are to be CNCed by a local mill here in Brooklyn, NY. I have a 2D design (PDF and CRD), but I need help making some modifications, as well as translating it to 3D. Pay is negotiable. I will basically pay whate…

Few more prints up for grabs to anyone in the US who responds first. Fret sander and two screw holders with the gridfinity lobbed off so they are just free-standing.

Long story short, customer want to add carbon fiber in the neck for strength. Without string tension, the neck is dead straight; with strings, it's about double the relief he'd like. Is it insane to add carbon to this guitar? Or is it fine?

Hi friends, I just stumbled upon a 1966 P-Bass, nearly completely original. The owner bought it in 1971 and it had already been stripped of its original finish. That was a thing back then. You can guess that 55 years of gigging had the wood absorb much of the owner’s DNA and sweat. Maybe a few beers as well. Surface was quite tacky as you can expect. I cleaned it with naphta and StewMac’c brand-new cleaner (quite a great product I'd say…

https://www.aircraftspruce.com/catalog/wppages/bargainbag_spruce.php The air craft industry uses 1/4 sawn sitka and this is a box of their "Scrap wood" that is a good value to have on hand, (usually like 36 in long and various width) imo if anyone is in need. It's an odd ball source, but just spreading info. Be well.

Here are some pics of 1918-1922 Gibson A3 "Ivory" Mandolin Dovetail Joint Measurements and Angles.