The Hub

Hey guys. I guess this is an old topic, everyone talks about it but I haven't been able to find a definitive solution for this. Here's the deal: I'm working on a PRS Silversky that has this old problem that when you use the trem bar, one string (G in this case) goes sharp. I made a few adjustments to the nut as we all know that's the first thing to look at...no good. This guitar is new so I'm pretty much ruling out the bridge and posts si…

Hello, I hope everyone is having a great 4th of July weekend so far. I was recently asked by a friend to work on a cheap S101 bass someone had given to him. It had no electronics and it was severally back bowed. After finishing up the electronics, I did the set up. He wanted the guitar tuned low, to Drop C. So, I went out and bought some Ernie Ball Power Slinkies 55-110. Once I got to the nut depth check, it was clear there were large, g…

Hi all, I got a Do Santos DSMSCC RC in shop, the Spanish heel has failed , or rather collapsed into the soundboard, splitting it on both sides along the grain, a broken brace just under the fingerboard extension , cracks on both sides on the top/side bindings, I measured wood humidity on the fingerboard 9% and inside the (very inaccessible) body 11% The normal procedure would be to re-humidify before jacking or clamping back into place ,…

Howdy folks, I'm a 2026 graduate of the two year guitar program at Red Wing (Minnesota State College Southeast). Between my two years at Red Wing I worked at Collings Guitars in Austin, TX for two years in the acoustic neck department, shaping and finish sanding ~2000 necks, radiusing and gluing ~750 fingerboards, and pressing ~100 sets of frets. I also spent a couple months in the finishing department level sanding and pore filling ~300…

I’ve changed up my buffing protocols (again) and am selling off two lots of compound bars: -four bars ColorTone Fine, $55+shipping -three bars Menzerna P204 + two bars GW16, $100+shipping. USA shipping only. thanks, Creston

I am building an archtop mandocello (A style) and I'm trying to find out how to make the neck block. It would be more or less like an A style mandolin neck block, but obviously quite a lot bigger. More or less like the image attached. The blank should be aprox 10 x 8 x 12 cm. I'm trying to find a piece of hardwood big enough for this, would it be acceptable if I made some kind of laminated piece? And how should the grain direction be idea…

LOOTHTOOL I've made some purchases on LOOTHTOOL, but it will not let me review. SO, the VL’s Precision Feeler Gauge Set is a rock solid 10 of 10 or five Amazon stars. Nice blades, EXCELLENT tool box, well marked, I'm thrilled!

Question about splines: At what point are they necessary? My question is primarily regarding the crack to the left between the bridge and the sound hole as well as the crack at the upper bout that runs along the fingerboard extension. I have already glued them both and used the TJ cleats that run the full length of the cracks. I have already splined the lower bout crack that runs from the bridge to the binding as it was super gappy and d…

Sadowsky use unique control plate screws which are much smaller than common plate screws. I believe the ones they use are: #3 × 3/8" Phillips Pan(domed) Head Black Oxide csk self tapping Sheet Metal Screw Type AB thread. Being in the UK, these are really hard to find, pretty much don’t exist here, so can anyone please help me or point me in the direction of a supplier? I’ve contacted Sadowsky direct with no response and also many of my main…

So today, while restringing a guitar, one of my techs dropped a .012 e string that slid down the wall and landed on a plug that was just slightly loose from the outlet. It landed just right and made a huge spark. No lesson to be learned here but a crazy thing to happen! We are changing our name to Sparky’s Guitar Service. 😬

A customer brought in a Gibson ivory top A3 mandolin. It's in good shape and has all the parts. He found it at the local thrift store here in Bishop. He wants it mechanically sound. Here are the problems: 1) Everything that comes into the shop has a shrinkage component and the effects of course very from instrument to instrument. This instrument is no exception and the results of that shrinkage, in this case, are severe. The top, ba…

First time making purfling to match a repair. Problem: couldn’t get it to bend without delaminating and cracking. Veneer is 6 plies using 4 of SMs 0.023” and 2 maple at 0.025” cut to 1 1?2 inches wide. Glue up with Titebond Veneer glue, final stack at 0.140” thick. Let it dry 2 days, cut a few 0.090” strips, then used some super soft just at the waist and despite going very slowly the strip skewed, delaminated and started to break plies. W…

The sub menu is back by both popular and reasonable demand.

HI EVERONE! I just found a sealed box ready to ship that must have been sitting awhile. In it I found a new "signed" Opti-visot with t double lenses as the one I use I know it was ready to ship to someone, and I think it was a LG person. If you are the person that I promised to send this too, please let me know. Thanks, Dan Erlewiine

So it seems that a drum sander would be very handy for many parts of a "build from scratch". There are a few out there that cost under $3000.00 that can handle wood up to 4" thick and are wide enough to sand a back or top after the halves have been joined. Jet JWD-22-44 open stand, 22"width Jet JWDS-2550 open stand, 25" width SuperMax 19-38 opend stand, 19" width SuperMas 25-50 closed stand, 25" width Questions: Any recomendations on the sa…

Thought fellow looths might enjoy this geekery. I've often wished for custom size heating blankets, but didn't even try uploading the file to get a quote from some of the major manufacturers. I was looking to spend countless hours of my life on something and save a hundred bucks. So I did some research, a little bit of head scratching, a slight bit of math reckoning, and made this '70s Martin bridge plate remover. Pretty slick, nice…

(for background context, I'm probably in the dozens of fret jobs so far, and no I don't let frets leave my house like this) When I got started getting interested in building guitars, I got the StewMac bundle of fret files/book, which comes with the concave toothed file. Over time, I ended up getting both the Narrow/Medium and Wide/Jumbo files. I don't do it often, but occasionally I do something like shown in the picture, where I'm clearl…