The Hub

Hey folks! I picked up a neck relief gauge from Doug in one of the earlier batches, maybe the introductory run? Some of the small feet caps that thread onto the moving legs of the tool have cracked, broken, or become worn down. I contacted StewMac about purchasing replacement parts, but they don't sell subparts for the relief gauge and otherwise won't help me. They appear 3D printed, so I was wondering if anyone with the means to print s…

I've built a number of classical guitars with an adjustable neck and they seem to gather quite a bit of interest, so i'm currently in the process of looking to refine the design and build. It's quite a simple construction where the neck is held together by string tension and hangs on a pivot. I developed a 3d printed "socket" which acts as the interface between the body and the guitar and allows for some fine tuning of the alignment of t…

Hey Everyone! I have finally gotten jealous enough of everyones 3d printing antics and want to get in on it. Does anyone have a suggestion for starter setup. I have saved around $500. Should I hold off and save more? I do not have any big goals but would like to copy some of the looth prints. Thanks!

I had a Flashforge Adventurer 5m pro and liked it but it suddenly stopped connecting to WiFi. Customer support was super frustrating and I returned it. But i did like it when it worked, aside from wishing it had a larger print bed. Any recommendations on what I should look at in the <$400 range? I’ve been reading and googling but have yet to find any advice that seems to hit the spot. Thank you!

I had a feeling I should have updated Fusion before 3D Club... Todays New update introduced Project Isoparametric Curves "Isoparametric curves in the Sketch environment, adding new ways to extract surface U and V curves for more controlled lofts, rails, and surface transitions" ...The meridians on the shaft surface seen in the attached photo. I still haven't fully grasped how to align these between faces, attached is a quick…

Found this, will print later, saves a little design time. https://makerworld.com/models/1835300?appSharePlatform=copy Having made 3D printed Vacuum fixtures for CNC previously, I’d recommend printing as close to 100% theoretical density as possible, as any voids can and likely will lead to suction loss. Finer dimensional stability and layer adhesion with something with Glass Fibres will probably help. I’d avoid materials with additives th…

Hi folks, I thought you might be interested in this approach to having easy height adjustment for a GoBar deck. I learned this tip from my buddy, Don Parker. He lurks around here too from time to time. :) The basic idea is rather than having a booster platform on the base for use when gluing braces to plates you bring the roof down lower. There is a 3D printed spacer in black in the pics. I linked to a downloadable STL and 3MF of…

Santa heard I had a challenging year so he got me a 3d printer for Christmas. I’ve been printing like crazy, learning the machine. This has resulted in a bunch of tools that either don’t work for me, were attempts at mixing colors, or have very minor printing blemishes. Two lots up for grabs to anyone in the US who wants either. I’ll mail to you for free. First one to claim each gets it :) First lot has parametric nut and saddle sanders…

One of the first things I made with my 3D printer was this small sanding block with a ball handle that fits my palm. I was inspired by the little L-N squirrel tail block plane that my father gave me. I have neuropathy in my fingers, on top of arthritis, and it's uncomfortable for me to hold the little blocks of wood that I used before. I was surprised how well this works, and these two tools are always within arm's reach.

@member @member Starting the discussion here to get the planning underway. I am presenting at Cremona next year, so I thought I would use the opportunity to do a dry run during this event. Topics - 1. Modeling and 3d Printing Simplified for Guitar Repair Barbarians. 2. Touching up Martin Mahogany. 3. Color and Material Theory Simplified for Guitar Repair Barbarians.

I watched the Guild F-20 video (https://dev2.loothgroup.com/groups/repair-and-restoration/forum/topic/cracker-x-braces-on-guild-f20/#post-60310) with great interest since I've been working on a Gibson L-3 with a similar problem. A little back story - The original repair request was to address a small pickguard crack on the sound hole side. After peeking inside, I saw 5 loose brace ends on the treble side. Still a pretty standard repair…

Would anyone be able to 3D print these plastic pieces from this Fender switch kit? Unable to find them anyway anymore without paying 3 times as much as I did 2 years ago. They seem super simple https://www.stratcat.biz/225800-kit.shtml

Anyone know where to purchase something like this? Also, I think the “maker” place in town has a 3d printer, has anyone had luck printing pickguards?

I've been trying to figure out an easy to use jig that will allow me to clamp a top and back fast, so that I can use hot hide glue. No way with my spool clamp method I could ever get everything clamped in time. I thought about trying to use pneumatic cylinders with 3D printed perimeter feet, but that seemed very complicated and a lot of work to get something to attach the pneumatic cylinders to. But it kept coming back to me that usi…

Hi Thought I'd say "hi". I've just joined the group. I'm Rob, I'm based in Yorkshire in North England. I'm mainly interested in elictric guitar and electric bass building and playing. I've built around 5-6 guitars/basses through 3d printing. I've two Prusa MK4's and been printing for around five years. The design and build of them is logged here https://www.basschat.co.uk/topic/485214-a-3d-printed-six-string/ And https://www.basschat.co.uk/t…

Here is a super basic thing I just modeled and 3d printed. Small drill guides to place a 2mm hole directly centered in the side of a fretboard. I made a few sizes for different fretboard thicknesses. Seems simple but its a huge time saver.

I've seen the Elevate Luthierie jig, and it seems simple enough. One thing I don't like about their explanation video is the handwaving around "set the joint length where you want it"...feels like even with the jig, you have to do too much measuring to make it fit exactly (or within the tolerance you want) Given I can model well enough in Fusion and have a 3D printer, feels like a challenge to take on! As far as I can see, the jig is just…

3D printing and CNC are two areas that I am interested in as a way to facilitate acoustic building. Two questions: 1) For those of you that have both capabilities in your shops, which do you find more useful or more often used on a regular basis? 2) How did you choose a cnc machine? Given the high cost and huge number of products in the marketplace the decision is a bit daunting. Given that the learning curve is steep, I am inclined to b…