The Hub

I've built a number of classical guitars with an adjustable neck and they seem to gather quite a bit of interest, so i'm currently in the process of looking to refine the design and build. It's quite a simple construction where the neck is held together by string tension and hangs on a pivot. I developed a 3d printed "socket" which acts as the interface between the body and the guitar and allows for some fine tuning of the alignment of t…

Found this, will print later, saves a little design time. https://makerworld.com/models/1835300?appSharePlatform=copy Having made 3D printed Vacuum fixtures for CNC previously, I’d recommend printing as close to 100% theoretical density as possible, as any voids can and likely will lead to suction loss. Finer dimensional stability and layer adhesion with something with Glass Fibres will probably help. I’d avoid materials with additives th…

Hi folks, I thought you might be interested in this approach to having easy height adjustment for a GoBar deck. I learned this tip from my buddy, Don Parker. He lurks around here too from time to time. :) The basic idea is rather than having a booster platform on the base for use when gluing braces to plates you bring the roof down lower. There is a 3D printed spacer in black in the pics. I linked to a downloadable STL and 3MF of…

Hi Thought I'd say "hi". I've just joined the group. I'm Rob, I'm based in Yorkshire in North England. I'm mainly interested in elictric guitar and electric bass building and playing. I've built around 5-6 guitars/basses through 3d printing. I've two Prusa MK4's and been printing for around five years. The design and build of them is logged here https://www.basschat.co.uk/topic/485214-a-3d-printed-six-string/ And https://www.basschat.co.uk/t…