The Hub

It's not a big chip so Iwas thinking of trying the black glueboost fill n' finish. Is that the best option? Any tips/suggestions appreciated. Thx! David

I was approached by a local music venue about finishing over the signatures on this Dean guitar. I have finished over signatures before, but never an entire guitar. The main challenges, as I see it, with this endeavor is prepping the existing finish. Cleaning the existing finish without disturbing the signatures will be time consuming enough, but abraiding/sanding the finish will be cost prohibitive. I have already experimented on a test…

Dovetail was 9/16” deep, and 1 9/16” wide at the back. 15th fret was 1 mm tail side of the end of the dovetail socket but a slight angulation towards the headstock landed in the right place. Hide glue, released easily. Nice everyday player, finish and binding beautiful, good spruce top, warped poplar neck.

The archived video and recent Council of Elders were very helpful in upping my binding reattachment game. Now I need to correct how much I've been charging! Someone mentioned that Martin pays $90/individual separation, I believe regardless of the length of the separation. Does this include finish repair, if needed? Any other guidelines on pricing for binding reattachment will be appreciated. Thanks! Neil

I working through a long top crack repair on a c.1964 Fender Newporter and need to do a little touch-up on the clear coat. The top coat is matte over a do-do brown stained mahogany top, I'm guessing around a 10-20% reflectivity. Questions: 1. What top coat product did Fender use on these? 2. What should I use that has great self-leveling qualities and will melt into the old finish? <>

I had a customer ask me to take a look at this electric guitar an "amp guy" did some work on. (if you couldn't tell by the size of cap he installed 😆) Seymour Duncan hsh pickup configuration. Is there any good or logical reason one would put the north start, finish and the south finish all on the same lug of a switch? The guitar plays but has more buzz on the hb settings than the single coil. I know how to rewire it to be more... traditi…

Hello Luthiers and Guitar Builders,We manufacture and supply high-quality natural bone Guitar Nuts and Saddles in custom sizes for acoustic, electric, classical, and bass guitars.What We Offer:• Custom-sized Bone Nuts & Saddles• OEM & Bulk Orders• Precision Cutting & Finishing• High-Density Natural Bone Material• Consistent Quality• Worldwide ShippingWhether you need a single custom specification or bulk production for your workshop or…

*Photo added* Ding repair on spruce top, 2015 Collings 0002HE #23701. What are y’all reaching for when repairing dents in nitro? GlueBoost fill & finish or drop filling with nitrocellulose? This is a well-used guitar; not pristine and the owner has reasonable expectations that the repair will not be “like it never happened” Bonus question: If there is bare wood, should I seal it with shellac to preserve the color before proceeding to fil…

Hey Looths, I have a 1980 Guild 12 string in the shop and while doing a preliminary examination I noticed this odd discoloration inside of the guitar. My immediate thought was water damage, although it hasn't bled through to the outside of the guitar and lifted the finish. I also thought of glue smear but I can't quite tell. Any thoughts here?

I've got a client with a '72 Tele. It needs a re-fret, but the truss rod isn't functioning. In fact it's backed out of the channel significantly, and there's a bulge in the neck underneath the first fret which suggests to me there's something going on with the truss rod anchor. The puzzling thing is the wood in the neck has bulged, but the skunk stripe and the finish don't appear to be disturbed at all. I'm thinking I'll probably hav…

Hello, I just received an unfinished, slotted but not fretted maple neck from Warmoth. I believe standard practice is to fret then finish but I’m curious if it might be better finish before fretting? I understand one would want to prevent finish from entering the slots. I’m and going to use tru oil and do a light finish, maybe three or four light coats. Thoughts for this beginner? Dave

It was attacked by a Martin Dreadaught on a small mountain stage resulting in a faceplant. The top is Redwood. I was able to get it to glue up fairly well and have done some splice and drop fill on the vertical cracks. I'm curious about suggestions for the deep cross grain areas. I am hoping to not re-shoot any lacquer and just rub out the finish with some Kovax dry sanding. It was never high gloss buff to begin with and it's a personal…

Hi friends, I just stumbled upon a 1966 P-Bass, nearly completely original. The owner bought it in 1971 and it had already been stripped of its original finish. That was a thing back then. You can guess that 55 years of gigging had the wood absorb much of the owner’s DNA and sweat. Maybe a few beers as well. Surface was quite tacky as you can expect. I cleaned it with naphta and StewMac’c brand-new cleaner (quite a great product I'd say…

Hello, I hope everyone is having a great 4th of July weekend so far. I was recently asked by a friend to work on a cheap S101 bass someone had given to him. It had no electronics and it was severally back bowed. After finishing up the electronics, I did the set up. He wanted the guitar tuned low, to Drop C. So, I went out and bought some Ernie Ball Power Slinkies 55-110. Once I got to the nut depth check, it was clear there were large, g…

Howdy folks, I'm a 2026 graduate of the two year guitar program at Red Wing (Minnesota State College Southeast). Between my two years at Red Wing I worked at Collings Guitars in Austin, TX for two years in the acoustic neck department, shaping and finish sanding ~2000 necks, radiusing and gluing ~750 fingerboards, and pressing ~100 sets of frets. I also spent a couple months in the finishing department level sanding and pore filling ~300…

This is an LP copy from Memphis guitars. It looks like it has had the headstock repaired at some point. Also, there is what looks like some separation of the fretboard near the nut. I don't know if its left over from the repair or if its something new and just trying to go this way. I'm asking the group to look at the pics to help me figure out if any corrective steps are needed. Also from a finish repair standpoint, how to deal with i…

Rask Guitars — Utah (relocation required) Rask Guitars is a Utah-based custom shop dedicated to building exceptional instruments — primarily high-end acoustics, alongside electric guitars and prototypes. We operate with a small, focused team where craftsmanship isn't just a standard, it's the entire point. We're growing, and we're looking for a skilled, experienced luthier who's ready to plug into a real production environment, contribute…

I have a Favilla Classical guitar on the bench, in for a bridge reglue. This is a low to mid-range classical guitar, made circa 1960, and it's an heirloom guitar for the customer, he basically wants it back in playing shape. The story is that he went away on vacation, and when he returned the bridge had delaminated from the top and took a fair amount of finish with it. It also appears that someone attempted to glob on superglue at some…