The Hub

A customer brought in a Gibson ivory top A3 mandolin. It's in good shape and has all the parts. He found it at the local thrift store here in Bishop. He wants it mechanically sound. Here are the problems: 1) Everything that comes into the shop has a shrinkage component and the effects of course very from instrument to instrument. This instrument is no exception and the results of that shrinkage, in this case, are severe. The top, ba…

Just sharing some info to procrastinate my nth attempt at getting this thing together. and some venting. If you get one of these in with electronic issues, estimate high. Customer brought in a Gretsch Rally in pieces that he picked up from the last repairman (who died), and just wants it to play. Minor binding repair and a weirdly-angled zero fret were relatively easy to deal with. The dead electronics are the main problem.…

A fella left his 1994 Gibson Blues King locked in a damp garden shed through a hot humid summer. See attached pics! The clear coat has lost adhesion pretty much everywhere on the neck, back and sides, and is starting to let go on the top too in places. But 95% of the colour underneath seems to be hanging in there. Customer is open to a full refin. But I'm wondering how exactly the colour on these was applied, why it seems relatively…

I drew up and printed these F hole plugs for a customer a little while back, felt like showing them off here. The bottom diamond shaped piece has a M4 nut in it, and is super glued to the body of the plug at its two tips. An M4 screw threads into the nut through the counter-sunk hole in the top of the plug. The entire plug drops into the F hole, and then you can tighten the screw slightly to expand the plug so it clamps itself into plac…