The Hub

The tuner app I’ve used regularly on my smartphone for years has slowly become bloated with useless features, heavy, and totally impractical. I tried a few alternatives, but I didn't really like any of them. Since we are the kind of people who prefer to just build things ourselves when we need them, I decided to built my own tuner: completely free, ad-free, and actually effective. I even threw in some links to my social media. I think I'l…

I've owned this Jersey City made 12-string/drone 'harp' guitar for a few years and want to get on the repair. I've taken the necks off many dozens of Schmidt-made guitars but never one with two necks. I've searched the web looking for harp guitar neck removal and didn't find anything of use. Asking for any tips/aids/experience from the loothers. My plan is to make a custom neck removal jig that fits the necks, and then drill the typical…

Hi There, I've seen a number of jigs, Some seem like they might work with specific size frets but we all know that even same sized frets have some variances depending batch and where on the line it came off the spool. No matter how i do it I seem to scrape the bottom of the fret trying to make it perfectly flush. I've considered using small rotary round burr or cylinder and only touching the tang so if it does go to deep its…

Hi all, I am a newer guitar tech and after dozens of repairs this particular Simon & Patrick Luthier Cedar top SP6 acoustic dreadnought from the 90-ies with a bolt-on maple neck has been an incredible challenge. It came with a maxed out and stuck truss rod with a considerable up bow in the neck, extremely low saddle with barely any string break angle, so it needed a neck reset. Later on I figured out that it also has a pretty dras…

Is anyone using the LuthierTool Neck Angle Jig. I have a quick question about setting up to cut the tenon and getting the correct angle dialed in for cutting the heel block. TIA for any help

Doug Proper designed a sanding jig that supports variable concave and convex curves, described in the following Loothgroup article: https://loothgroup.com/post-imgcap/the-variable-radius-sander/ I built one and am impressed with how it facilitates preparing bridges, braces and also allows tracing any radius using the chord formula. I made a rough measured drawing and assembly guide to share, with Doug's blessing. First step, ma…

I’m about to do my first ebony fingerboard replacement and wondered if there was any advice, compared with rosewood fingerboard construction. I plan to use the small aluminum jig and fret saw to cut the slots manually, indexing off the old fingerboard. Thanks for any advice or encouragement!